Make a set of clip brush 'stairs' - the clip texture makes them invisible. Each step should be 16 units high, but only 2 units wide.

The player moves up vertical space instantly so the steep stairs will move the player up whilst they cross the small horizontal space.

You could also make the stairs out of normal brushwork, but I'm guessing you want something that looks like a ladder as opposed to steep, infinitly thin steps.

To have a proper ladder - climbing down, normal speed movement etc. you need code Quoth has ladders, as will RQ. 

WC 3.3 working on windows vista / ATI -

http://www.dll-files.com/dllindex/pop.php?opengl32

Drop the file into your wc folder. Which most likely you installed onto another machine and then copied to your vista machine.

Ah, progress. 

 

Selection in the 3d window. 

But it's adapting the UV's to the visible verts, so turning the camera causes an acid trip. As in texture distortion within the face. 

never work for me, no matter the wad. trying to use ikbase - won't work. there are no textures too large in that file, so I'm not sure why it isn't automatically converting. Not too handy with tex mex, either. is there a simple way to convert wad files other than the program provided with bakers wc 3.3 installer?
I'm almost sure there is an obvious solution right in front of my nose, but I'm too burnt out to see it. 

 

just load the wad file with texmex, then go to file ->save copy -> save to wad3
this should do the trick, as i'm usually do it

http://www.imagebam.com/image/8d9f3b38459316 

thank spy! 

doesn't work.

I need to convert them to hlwad files, not wad3! 

to work! I never had any problems with it, except if the wad contains over 1000 textures it will fail, or if one of the textures is too big (like >256x256 or something) then it wont work either.

The .wad files must be placed in worldcraft\textures\ then it just works automatically!

Im using XP32 BTW, havent tried other OS's. If you would like me to convert a wad for you and email it to you I would be happy to, just give me a URLs for the wads you want converted! 

with a hammer3.4 it works fine, maybe wc3.3 a bit differs 

I'm using Worldcraft 3.3 and trying to make my first Quake map. Quality wise its pretty visually appealing but I suck whenever it comes to traps and shit(I have the ideas but I cant technically implement them). So I have a question. How do I make a monster teleport in. The only teleport entity I have is info_teleport_destination and that just lets me give a name, not a target... PLEASE help. i have a lot of good maps iw ant to make but this really puts a hault to that. 

I included the MAP (source) file for my last speedmap, here:

http://www.celephais.net/board/view_thread.php?id=60343

It has several monster teleporters in it. 

under standard Quake progs, first you have to make a small box-room away from the main map, put your monster in there. Then make a brush which covers the monster.
Next select the brush and click the "to entity" button (or right click the highlighted brush and select "tie to entity" or whatever it is from there.
Make the brush into a "trigger_teleport", set teleporters target to the name of your teleport_destination, and also give the teleporter a unique "targetname" (the name of the teleporter).
Then make another brush which will be the trigger for the monster teleporting in, so make sure it is in a place where the player will walk into it, and cant walk around it. Highlight this new brush and click on "to entity". Make this one a "trigger_once". Set the target of the trigger_once to be the same as the targetname of the teleporter you have already made.

These "brush entities" you have made will not appear in-game, so it doesnt matter what texture you give them. Most wads contain a texture called "trigger" which has "trigger" written all over it, but this is not necessary, any texture will work. I use the "trigger" texture as a marker so I can see which brushes are entities in my editor.

You can set "keys" of the trigger entitys to do things such as alter the amount of time it takes for the trigger to fire, for example, after the player has touched it, messages you want to appear in the middle of the screen and what sound is to be played (if any) when the trigger is fired. 

I really have all these great ideas for maps and traps, and some of them involve teleporting monsters. I am using Worldcraft 3.3 and the only entity I see for telpeporting is info_teleport_destination... is there any help you guys can offer? Basically I want the player to step in a specific area and have an orgre teleported to a certain spot. What do I have to do to get this to happen. I can't seem to get it to work... and I all these great ideas. I would REALLY appreciate it if someone could help :) thanks in advance :D 

thanks for the teleport help guys, ill try it out. sorry for the lag outs. wernt sure if my messages got through so i posted twice for save keeping. ima go try out these suggetions :D thanks alot 

I'd love the kingpin set and maybe the ikblue... I'd love tons of them to be honest, but those two sound pretty inspiring right now. Thanks, dude! 

(at work) 

That was very hacky!

Yeah - for some strange reason IKBlue wouldnt convert because of two or one weird files within the wad. I had to remove a rather cool door texture (like 8 triangular wedges with symboly on it) and the pallette file to get it to convert.

As for the kingpin textures - well that wouldnt convert and it wouldnt say why! So what I did was open Wally (good old buggy Wally) and make a new package, a half life package (to which it attributes the file extension ".wad" rather than ".hlwad"), than I opened the kingpin .wad in wally, manually select all of the textures (using the left hand index column of Wally), copy them. Then go back into the new package, paste all of the files in. Then I saved this new package.
When I went to the directory through windows to view my new wad, it appeared as a 0Kb file, but when I copied it into another folder it came up as being 23Mb. Then all I did was rename the file from "kpin.wad" to "kpin.hlwad" using windows rename function (right click on file, click rename). Then I tried to load it into Worldcraft and it worked!! Job done!

Weird and annoying NOTE:
First I tried to do this on Windows Vista. Putting the original ikblue and kingpin wads in my worldcraft\textures\ DIR then loading WC brings up the all_wads_to_hlwad tool on startup. In Vista it calls an error for each wad, but wont show any details of either errors. In Windows XP it calls out the error for texuture No. 51, which atleast helped me identify which texture it was causing the problem. I used Wally to remove the bad texture and pallette file and it worked as normal.
But even under XP there was no detailed error report for the kingpin texture.

So in conclusion Drew I would recommend the following method in future:

1 - find your wads of choice

2 - open a copy of Wally: http://www.quaddicted.com/tools/wally_155b.exe

3 - open your first wad to convert

4 - click on "file-> new-> Half Life Package (wad3) (wad)"

7 - when the new empty wad file is opened, go back to the quake wad you are converting, select all of the files using the left hand index column, then drag and drop them into the new package.

8 - save your new package as normal, wherever you want.

9 - close Wally, and navigate to the folder with the new wad inside. Rename the new wad to "title.hlwad"

10 - Go and make a cup of tea! :P

PS - I will email you my results shortly! :) 

ever since i started compling maps ive noticed I cant even see my hud in the quake(I use the ezquake client). did it fuck up my resolution somehow? i mean my resolution is 800 x 600 like its alwayus been. but now part of the console drifts away and flickering where my hud should be. that happens on all hud types, 'classic' 'new' 'combined' and so on. PLEASE can someone help? 

+ and - make the HUD bigger or smaller, but I doubt that's the problem.

What engine are you using? 

ezquake is for Quakeworld. Use Fitzquake for singleplayer: http://www.celephais.net/fitzquake/ 

the thing is ive always used ezquake for singleplayer before and it only JUST started happening when i began compiling maps. idk what could have gone wrong. its hard to describe. i cant see my HUD, usually whatever i was previously looking at(such as console) fills that in... if you know what i mean, how if you ever float outside a map that kinda thing happens. its relaly really annoying and its completely fucked up my HUD. no idea how to fix it. but yeah ive ALWAYS used Ezquake for everything and its been just fine up until now 

thanks!