 News | Forum | People | FAQ | Links | Search | Register |
Log in |
|
|
yea, those dir's all exist on my pc lol actually i manually put all the files there myself to try and fix the issue. ill try doing what you have done to fix the issue and if that doesnt work, ill try my batch compiler.
use a command prompt!
You have more control over each step of the comiplation process this way! Just stick all of yer tools in a folder like "c:\quaketools\" or something, then in Worldcraft go: file> "export to then save it in "c:\quaketools" then run from the way I described in my first reply, or write all of the commands in a batch file and run the batch file, i.e: open notepad and write: @echo Compiling testmap1 @echo Running... @QBSP testmap1 @vis testmap1 @light -extra testmap1 @echo Finished! Now copy the save this file to c:\quaketools as a If this seems very patronising of me then I'm sorry! Im sure one of the other guys will know a simpler solution!! :P ill try all solutions and which ever one works the best, ill use that one from now on lol thanks guys.
tryed writing the bat file u suggested even copyed and pasted what u said to write and ran it , and the command window just opened and closed no bsp.
Well, the error is right the first command where the
Make 200% sure these folders are the right: C:\BSP\Quake\Bats\ c:\quake\id1\maps\ hold on i might done your way the wrong way i didnt type it in command promt i just double clicked it afterwards lol
the "nomapversion" program is not important, all it does is remove a key from the enitity "worldspawn" which is "mapversion" "220"
This is not critical, it will still run just fine in Quake. Putting your The error report from your process window could be re-posted here, because there is a limit to the size of one word on this messageboard, so if you re-post the error log but put some spaces in to break up the large strings of characters, we will be able to see the complete filenames.... That might help. evidently all the csg files and such just disappeared. i have a batch compiler that has been set up for quake i just dont have the batch fiels.
from Bengt Jardrup? ligh compiler and engine too
since more and more maps and mappers are using it, and Bengt`s light tool is probably the best and his engines are good at handling big crowded maps and preferd by many I asked aguirRe the same question a while ago (i.e: when his engine will support colored lights), but he answered it is not part of his plan yet... Maybe he will changed of mind if enough people are pushing for...
aguirRe, any comments ? Look at AguirRe's profile under "people" at the top of this page, and go to his homepage! It's excellent! You can also read his Quake One Tooltips document, it contains a lot of info, and it's a brilliant resource to look up error messages, find out what they mean and how to overcome them...
you use "TxQbsp", it's the best bsp tool ever dude! Its extremely stable. Also his modified GlQuake is an excellent tool just to run maps which wont run in other engines. Often you find that it will run your map and tell you what is wrong with it! It is generally considered good paractise that you create maps to run in other engines, although there are some maps and mods out there which will only run in AGlQuake because they are over the engine limits.....
so, whats up now? i got a new repot on my log.
** Executing... ** Command: Change Directory ** Parameters: c:\quake ** Executing... ** Command: Copy File ** Parameters: "C:\BSP\Quake\Bats\testmap1.map" "C:\Program Files\Quake\id1\maps\testmap1.map" ** Executing... ** Command: C:\Program Files\Worldcraft\quaketools\txqbsp.exe ** Parameters: "C:\Program Files\Quake\id1\maps\testmap1" TxQBSP 1.12 -- Modified by Bengt Jardrup Inputfile: C:\Program Files\Quake\id1\maps\testmap1.map Outputfile: C:\Program Files\Quake\id1\maps\testmap1.bsp ------ LoadMapFile ------ 216 faces 37 brushes 7 entities 8 miptex 30 texinfo Added 7 texture frames Building hulls sequentially... Processing hull 0... ------ Brush_LoadEntity ------ ----+----+ 35 brushes read ------ CSGFaces ------ ----+----+ 204 brushfaces 158 csgfaces 150 mergedfaces ------ SolidBSP ------ 172 split nodes 48 solid leafs 108 empty leafs 17 water leafs 401 leaffaces 390 nodefaces ------ FillOutside ------ 84 outleafs ------ MergeAll ------ 98 mergefaces ------ SolidBSP ------ ----+----+ 49 split nodes 28 solid leafs 19 empty leafs 3 water leafs 178 leaffaces 142 nodefaces ------ Portalize ------ 22 vis leafs 38 vis portals ------ Tjunc ------ 134 world edges 472 edge points 162 edges added by tjunctions 0 faces added by tjunctions ------ MakeFaceEdges ------ ----+----+ ------ GrowRegions ------ Processing hull 1... ----+----+ ----+----+ Processing hull 2... ----+----+ ----+----+ ------ FinishBSPFile ------ WriteBSPFile: C:\Program Files\Quake\id1\maps\testmap1.bsp 90 planes 1800 203 vertexes 2436 61 nodes 1464 30 texinfo 1200 158 faces 3160 192 clipnodes 1536 35 leafs 980 194 marksurfaces 388 798 surfedges 3192 400 edges 1600 15 textures 185624 lightdata 0 visdata 0 entdata 565 Elapsed time : 0:02 Peak memory used : 0.4 MB ** Executing... ** Command: C:\BSP\Quake\Bats\QBSP.EXE ** Parameters: "C:\Program Files\Quake\id1\maps\testmap1" Transparent water QBSP with Hipnotic extensions MultiWAD version 1.65 by Ken Alverson based on original code by John Carmack outputfile: C:\Program Files\Quake\id1\maps\testmap1.bsp ************ ERROR ************ parsing brush ** Executing... ** Command: C:\BSP\Quake\Bats\rvis.exe ** Parameters: "C:\Program Files\Quake\id1\maps\testmap1" ---- vis ---- ************ ERROR ************ Error opening C:\Program Files\Quake\id1\maps\testmap1.bsp: No such file or directory ** Executing... ** Command: C:\Program Files\Quake\glquake.exe ** Parameters: +map "testmap1" Don't use such stupid batch files.
Just run the tools individually in the command prompt -at least to see if it works. Qbsp, vis, light - it's as simple as that. The log above looks like there's something wrong with your batch, as if two QBSPs are run. Delete the second one (by Ken Alversion). Then it should work. you only need to run TxQbsp, it contains all of the features of WQbsp (Ken Alverson's) but it's more modern and has plently other newer features (it's stable as hell)
First run TxQbsp (with no commands) Then run Vis (type "vis -fast testmap1", or "vis -level 4 testmap1") Then run light (type "light -extra4 testmap1", or "light -gate testmap1") then you can run the map in Quake! :-) If you read the documentation on AguirRe's hompepage it will tell you all of the commands for his tools... if you read that log you will see that TxQbsp sucessfully comiles your map with no warnings! But then WQbsp tries to do the same thing and crashes. If you had run the tools one at a time you would have been able to view the map at that point, just with no vis (visual optimisation) and no lighting. The light and vis would have worked if WQbsp hadn't scrambled the perfectly good
(dont worry dude, I found it all very confusing to begin with) so far got it workin hehe thanx guys, u know of a website with a forum like this that i can ask modeling questions ?
OK, I have never really tried this! If you plan to mod for Quake1 I would look at:
http://www.inside3d.com Err, there are some tools at http://www.planetquake.com There's much much more but I.. I just (Im no coder...) Open the bat files with a text editor. And look at the paths and modify them. Where is the Problem?!?
|
|
| You must be logged in to post in this thread. |
|
| Website copyright © 2002-2024 John Fitzgibbons. All posts are copyright their respective authors. |