Open your config.cfg in the nehahra dictionary with a txt editor and add the included text after the key bindings

JQ only uses the joequake/config
when you change gamedir ingame 

AFAIK you can't mix light tools like that, the lit file is not self-contained.

I'd guess that the lit file contains offsets directly into the lightdata lump of the bsp, so if you run e.g. my Light after TyrLite, you'll just get psychedelic colour effects in an engine that loads the lit file.

Search QMap thread or Func_ for earlier discussions about this. 

This is an epic!

Rudl - No joy I'm afraid my man! Just gives the same old message! Thanks anyway tho

AguirRe - Thats a shame. Ill still put it to test later on, but I would assume that you know what you're talking about! ;)

All the more reason for you to make 'AguirRe's super duper lit-file generating modified light tool!' - Its just that you're engine with -extra4 -soft does give really nice rendering. So if it were possible to get Tyrlite to make the .lit and then use your Light to do the rendering it would kick!!

BTW do you have any kind of explanation for the message I report on #6650?

I get it with your Glquake (from nehquakebjp.zip) and Joequake, software and Gl 

Are you sure you have the big 50MB nehquake.zip from fileplanet via the Nehahra site? As far as I can remember, it contains the old dpnehahra.exe, nehahra.exe (2.67) and nehexe.exe (2.55) engines.

The error message you're reporting now makes a bit more sense, but the spr32 format shouldn't be a problem, all Neh enabled engines can handle that.

I suspect that you somehow have an old nehahra installation that has outdated stuff in it. Otherwise I don't know, I haven't heard anyone having that issue before. Maybe Mindcrime knows what it could be or if anything has changed on FP recently.

I can't d/l the big file to verify what's on FP, it's a several hours job for me. There seems to be another copy at http://qarchive.quakedev.com/?dir=./Nehahra , but I don't know how they compare.

Btw, you only need the exe from nehquakebjp.zip, the others are source files.

Btw2, the -colored option of TyrLite that seemed to fix your problems, might not be a good idea to use. It sets the bsp30 format according to the readme, which may cause problems for other tools and engines. I'd stick to bsp29+lit. 

Well, Ill re-download Nehahra, and see if I do have an old version (although I downloaded it within the last 2 or 3 months).

As for the colored thig - I'll try it again tonight without colored, but according to JPL thats what he uses, and I was able to light the map without -colored but it wouldnt let me use -extra.

Maybe I am going mad!! 

ACtually I use -extra -lit -colored in the Tyrlite command line... and it works perfectly ! 

I dont know if you read the Tyrlite.txt file, but it says that -colored defaults to bsp 30, so if that were true, the -lit wouldnt work. Which is why I didnt use -colored in the first place. AguirRe has read the readme (Tyrlite.txt) as well, and drew the same conclusion (naturally). However, after your and mine discussion the other day (JPL), I realised that if you DONT type colored, you get weird psychadellic effects like on post #6626, and if I used -extra, Tyrlite crashed! So as you and I both know, you need to use -colored even if you're doing bsp29 format with a -lit file, which directly contradicts the documentation supplied with Tyrlite.

So yes AguirRe, I know why you say NOT to use -colored, but actually it doesnt seem to work with .lit if you DONT use it!!!

In short - JPL I use the same commands, and it does work!!! :) 

I just checked it to make sure I wasn't going mad, I've done it before, I made a little test (box) map, compiled it, using tyrlite to make the .lit file, then ran the whole compile process again using your qbsp, vis and light, and the resulting map runs with coloured lighting in tact. 

Plant - I honestly hope you're right, and I'm gonna experiment a bit tonight!! But try a func_wall! (I have a feeling that it will look a bit 'disco').

Rudl/AguirRe - Kick me!

I was using an old version of Nehahra afterall!!!

Now it works fine :P

(what a tool)

Too much mapping has driven me mad, like czg ;) 

and I use the -lit switch 

*_* 

yeah, there could be some funkyness there, but you may be able to get around that?

Sleep time 

aguirRe is the one to listen to, he would know as well, probably better than anyone what the story is, just consider my ramblings as just that :) 

 

http://www.disenchant.net/ and send him an email :P 

to re-light Invein (i.e. keep the lit and then use my Light) and then load it in JoeQuake (refused to load lit - invalid size) and Fitz (psychedelic lightmaps).

So I'm pretty sure it doesn't work. 

It's been a long time, I did mess around with it once before, thinking about it know, there must have been problems, but it's a long time ago. It does work for me in a little box test map, as far as the colored lighting goes, all looks as it should and everything is in place, until . . . you place things like func_wall's _door's etc, then the func_eee stuff starts to happen, disco, psychedelic lightmaps as mentioned above etc etc.

Oh well, looks like it's just one or the other, sorry RickyT23, wild goose chase.

So I'm pretty sure it doesn't work.
That's good enough for me 

I also discovered the 'truth' last night! 

http://celephais.net/board/view_thread.php?id=4&start=478&end=500 

Until I smash engine limits and only AguirRe's engine will run my map, I'll just stick to Tyrlite!! 

I have figured out how to make lightning gun lightning which I can put in my level and then trigger to fire (almost) forever, as part of some sort of generator-type-machine, but isnt shambler lightning prettier?

Have been reading through Teaching Old Progs.dat New Tricks!

How would I change Lightning gun lightning for Shambler lightning?

http://celephais.net/board/view_thread.php?id=37116&start=11&end=11

What would I have to change in my info_notnulls? 

 

You'd use
http://celephais.net/board/view_thread.php?id=37116&start=14&end=14
instead.

The particular function you'd want is CastLightning. Rather than setting "enemy" "1", which would make the lightning shoot at the player, make another info_notnull. Find out the edict number of this info_notnull, say 23, using the 'edicts' command in the console. Then set "enemy" "23" on the lighting shooter.

Be warned, this kind of hack can be hard to pull off when you have skill levels, because if monsters etc. get removed, the entity number of the lightning target can change. One way to avoid this is to ensure that the lightning target is added before any monsters, so nothing can be removed earlier than this entity. The other way to do it is to have three copies of the setup in your editor, one that only appears in easy skill, one for medium and one for hard. Then work out the correct entity number for each skill level. 

I edit the .map file using wordpad or notepad and move the entity to the start? Or swap it with the first one? Would that work?

Thnx BTW :) 

The first way would certainly work, except that you'd have to do this each time, which would be a pain. It's better to make sure that the entities are in order in your editor, which in worldcraft means adding them first - no idea about other editors. I think the latter way of doing it(one version for each skill) is gonna be easier in the long run...