If you're not using the latest Light 1.42, please try that and see if it helps. Otherwise I don't know really, 256 lights are not that much.

If you send me the zipped map+wad, I'll take a look at it. 

If you're not using the latest Light 1.42, please try that and see if it helps. Otherwise I don't know really, 256 lights are not that much.

If you send me the zipped map+wad, I'll take a look at it. 

thanks. Since I have a good and working backup I will start working from this point. I have deleted all the lights I'v added recently but couldn't fix the problem. Strange. 

Maybe this is a stupid question but I have to ask it.
Let's ussume that I use textures from wad1.wad in a map. After this I extract all textures from the bsp file using Texmex and create a new wad2.wad. How is the texture quality ind wad2.wad compared to wad1.wad? In other words is there quality loss when packing/extracting textures from bsp files?
And also do the textures change anyhow if I use wad3 format instead of wad2? 

is loss-less (like bmp), so there shouldn't be any degradation. IIRC wad3 basically adds a palette for each wad instead of just assuming Q1 palette. 

I've noticed that the idGamma tool always seems to destroy the upper half of the greyscale ramp of the Q1 palette (slots 8-15). This can adversely affect textures with a lot of detail in the brighter end (e.g. in kjsp1 or Invein). I've uploaded a file http://user.tninet.se/~xir870k/idgammabjp.7z that contains my standard Q1 palette with the greyscale ramp restored and a modified version that suits kjsp1 very well.

Just put either one of the supplied paks in your id1 directory, making sure you don't overwrite any existing paks (rename to higher number as necessary).

For those using engines that can load external tga textures, here's a tip that might enhance visuals in mods that use a lot of textures in different colours, usually suffering from bad dithering effects. Just load the mod bsp(s) into TexMex and export to tga to the "textures" subdirectory of the mod. Then either use them as they are or put them through e.g. a brightening/contrast filter in an image program (e.g. IrfanView).

Especially the latter can cause interesting effects as the filter works with the full 24-bit tgas, so no palette limitations will interfere. The end result is often much richer colour tones of each texture in-game. Experiment for best results.

Another simple trick is to convert all the textures into greyscale (still 24-bit); this will let you experience Quake in a b/w setting. All entities will still have colours, though. 

make those void maps.

Noob question...

I reckon in a "coagula" style map, the whole shit is put into a giant box, which is covered in some black texture. On the inside of the box floor and sides, there are trigger_hurts for the gibbing effect.

Is that about right?

What is the best way to build the outer box, just a giant cube? Does its shape and brushcount impact r_speeds, vis time and such, or does it not matter? Should it be made of sky brushes (i.e. using some black sky texture)?

Way up in this thread, I read about the brightness of monster models being related to the brush beneath it. In the void scenario, this is pitch black. Someone suggested putting a brighter solid brush under the black sky brush so scrags in the void would be properly lit. But later someone else said that you should not have any brushes outside of the map. Who is right? Or should one just not place scrags out in the void?

hope you can bear my n00b-ness. 

...the whole shit is put into a giant box, or in some cases boxes.

Usually only the bottom of the box(es) are covered in trigger_hurts. Best to use three or so for each box; stacked but with small gaps horizontal.

The simpler the shape of the outside box the better. Shape does effect r_speeds in a complex relationship that is best explained by real better than I. Size is probably more of an issue for vis time with coagula maps. That's why some mappers cunningly break their coag maps into smaller sections (necros for instance).

The limit box should be made of sky brushes and painted with sky_void texture extracted from one of the coag maps. For even better performance, see if Kell will let you bundle his sky_void skybox with your map.

For monster in void lighting, put a spotlight in the centre of your map directly under the structure you build. Make it a spotlight with mangle 0 -90 0, then add an 'angle' field to the spotlight and give it a value of 180 (this increases the spotlight cone from the 60 degree default). You will need to cover (replace?) the bottom sky brush with a plain black brush.

One should definitely place hordes of scrags in the void, and one should definitely have fiends a plenty to trick into suicide. 

what distrans said and don't forget to fit one sky texture to the one side of the sky cube, thus you'll make polycount less. you can check polys with r_showtris 1 command in fitzquake. 

Is polycount less if you make just one face of the sky brushes sky tex (the one facing inwards of course) and others plain tex... since the plain tex faces are anyways discarded of during qbsp (if there are no leaks of course).

Aguirre's utils don't discard the other 5 faces if they are sky, although fitzquake maybe does this in the client then? (fuh doesn't, and you can't see through the sky if you float up in the map, contrary to id stock maps where you can see since the compiler was different, but the sky acts differently too. In fitz it's always correctly transparent from void.)
Also, faces that touch the skybrush are not removed in qbsp, even if they would be if the skybrush was normaltex instead ( => higher polycount with skytex).

What about lightmaps?

Can you upscale textures on sky brushes? If yes, what does that help besides lightmaps? 

nico: dunno about distrans' solution, but it sounds strange to me to have proper sky brushes on all sides but a solid bottom...
as for the trigger_hurts - upscale their texture (to 99) to reduce light times.

vondur: huh? sky faces, at least in sky cubes, are only split into two polys anyway, so what's that trick about?

bambuz: sky textures are not affected by scaling iirc. the outside faces are always solid, shoot at the sky with the shotgun and showtris on. making only one face sky texured destroys the transparency. being able to look through sky brushes from the outside is a feature of fitzquake (thus client related).
there was a similar discussion before - better read the corresponding posts by aguirre some ## above. 

Thanks distrans, vondur and neg!ke for the hints (vondur is taking time out from world domination to speak to me, wow).

oh mighty one, can u explain what you meant by "fit one sky texture to the one side of the sky cube"? use sky texture only for the inside? or scale them?

neg!ke of the speedmappery, how would you go about the lighting of scrags in the void if you dunno about distrans' spotlight solution?

anyway, I hope to be mapping away soon. I just learned how to copy and paste properly and as a result nearly shot myself (lucky I "don't have a gun"). arrgh. so much time wasted.

when u guys speedmap, just how excessively do you use copy and paste? do you grab some brush that looks approximately like what you need, c and p it and just modify it slightly? Or are most of the brushes in your maps newly created, innocent brushes?

and I suppose when terrain mapping, obscene amounts of copy and paste are used?

also when speedmapping, do you pick a standard wall texture first or do you create the architecture now and texture later? or do u texture as u go?

a side note: oh metlslime, func_msgboard sometimes gives internal server errors like "maximum process count for uid xxxxx reached" or so. just fyi. 

just to make one texture fit entire face of the cube (inner sides of it). but as nek!ge said it might had no difference if you use modern compilers... but i'd fit it anyway ;) 

...I'm not 100% certain, but I believe one needs a solid non sky brush on the bottom for the monster-in-void-spotlight-trick to work.

If it's not required... even better performance! Easy to check & fix once the map is built though. 

Make the bottom brush that actually seals the map area a normal skybrush. Then make another brush that's about as wide as the skybrush, but place it so it's top surface is just below the top surface of the skybrush.
What I did in Chapter's "He Falls Like Lucifer" was to make the skybrushes 64 thick, then make the "black" textured brush 32 thick, and place it inside the bottom skybrush with a gap of 16 all the way around in all three axes.

Light the top of the black brush with spotlights that are set to have a cone less than 180 degrees ( this is so the light they emit only hits the top of the black brush, and doesn't seep up the sides of the actual architecture ).

Overscale the black texture on the inner brush by a lot, and do the same to all the sky texture too. 

hmm, all methods are i thought of turned out to be useless (light entities next to the monsters, well lit spawn rooms, even sun-/ambientlight). the spotlight trick distrans posted works. apparently the important thing for lighting monsters in void maps is that there has to be a solid brush beneath them (not necessarily the bottom of the cube).
iz's quite awkward, but then again maybe also adds some tension when the player can only see the scags once shoot or reach the structure.

copy/paste galore! i rarely create new brushes, most stuff is pasted. mostly because new brushes - at least in quest - always have the size of the texture�, whereas a pasted brush has already one or more dimensions right.
textures have to be applied as you build the wall/room/whatever. if it looks ok, you can move on and copy it around. building the architecture first and texturing it later is more than impractical. 

ah, i see. nice idea. 

Trying to compile my old q1 maps using Sleepy's Map Converter and a .bat, and while some maps compile fine, others get the following message, followed by none of the compile progs doing their jobs and a lot of nothing being accomplished:

Parsing file c:\quake\id1\maps\bleh.map...Exception EConvertError in Modul mapc
onv.exe bei 000077B6.
'' ist kein gⁿltiger Integerwert.

With any new maps I start, it will get up to the 'Parsing file c:\quake\id1\maps\bleh.map...' part, and just stick there. Again, it works fine with other old maps, so I'm thinking everything is set up to work. If anyone else has run into this and has some sort of workaround, I would very much appreciate some help. 

it is finding a floating point number in your map in a place where it expects an integer.

Biff, are you using quoole? Biff, is this true? 

I regret to inform you that this post is almost entirely worthless. The only thing I can say is that I remember getting that error two or three times, and each time it was 6-12 months apart so that I never remembered what the problem was when I encountered it. Since it's been about that length of time, and I don't use Sleepy's tool anymore, I don't remember exactly what the cause was. However, I do remember that each time it happened the problem was something trivial with the .map, and I would subsequently dopeslap myself before moving on.

Some things to check: is the map already in Q1 format? Are you giving the player a message that includes quotation marks? Do you have any crazy brushes with no volume, faces with no area, or other technical problems? (MapSpy could help determine the answer to this last problem.) Are you wearing sweatpants? 

1. No CZG, I am not using "quoole". I stay away from the hard stuff anymore.

2. RPG, what are you using instead of Sleepy's converter?

3. WTF is MapSpy (I'll prolly Google for it in a bit)...?

4. No sweatpants, but a pair of pajama bottoms my cousin and his wife gave me for Christmas. The weather here (as you may well know) has been too damned insane for consistent sweatgear wear. 

I don't know what RPG is using, but AguirRe's compile tools do the conversion for you, you just got to set the switch in you .bat or whatever 

At least the later versions of AguirRe's tools do. 

But I'm not too swift on this .bat stuff: Is it possible for me to stick AguiRe's stuff in a seperate dir than the .wads, and still be able to compile, or do I need to have it all in the /id1 folder (where GTK needs the textures)? 

wad and tools in maps folder
textures extracted (.jpg)in id1/textures/q1_biffs tex

batch file eg,
qbsp.exe -q2map -oldaxis -transwater biffs.map

-q2map being the conversion switcheroo

can you have things in a different dir, dunno, prolly not, but I don't know, I've always only done it the one way, come to think about it, that's prolly why my wife left me, hmmm