Antialiasing is not working for me.I try FSAA command and its not working.What am i doing wrong? 

Little confused about something: does Quakespasm (as of 0.93.1) now have IPv6 support or not? I saw an earlier post (#3469) here of a condump that had it enabled. 

No. That was probably a condump from Quakespasm-Spiked which does:
http://triptohell.info/moodles/qss/ 

Increase MAX_GLTEXTURES from 4096 to 8192. Or have a command line similar to -heapsize, like maybe -texsize to force the larger texture bank alloc.

It seems I found a new hard limit and can't add anything with a new texture, sprite, model, or otherwise. 

I noticed the same bug in QuakeSpasm: https://github.com/yquake2/yquake2/commit/587382644c78e591e199d14efbb9220f8267152e 

What can I do to make Bal's beautiful Xmas map not look like a slideshow on my laptop. Thoughts? 

Try disabling the extra particles added by AD. 

How to? 

 

Besides the readme there should be a quake.rc file included in the mod. If you take a look there you can disable features that affect the framerate there as well. 

Hey, I'm having some pretty nasty audio stuttering issues on 0.93.1 on GNU/Linux. I've tried compiling from source with and without SDL2, as well as the amd64 builds on SF, but they all have the same problem. Game runs fine otherwise. I'm on Gentoo. Any ideas?

Command line: quakespasm
Found SDL version 2.0.8
Detected 8 CPUs.
Quake 1.09 (c) id Software
GLQuake 1.00 (c) id Software
FitzQuake 0.85 (c) John Fitzgibbons
FitzQuake SDL port (c) SleepwalkR, Baker
QuakeSpasm 0.93.1 (c) Ozkan Sezer, Eric Wasylishen & others
Host_Init
Playing registered version.
Console initialized.
UDP_Init: gethostbyname failed (Unknown host)
UDP Initialized
Server using protocol 666 (FitzQuake)
Exe: 13:41:52 Dec 14 2018
256.0 megabyte heap
Video mode 1920x1080x24 60Hz (24-bit z-buffer, 0x FSAA) initialized
GL_VENDOR: nouveau
GL_RENDERER: NV117
GL_VERSION: 3.1 Mesa 18.2.5
FOUND: ARB_vertex_buffer_object
FOUND: ARB_multitexture
GL_MAX_TEXTURE_UNITS: 8
FOUND: ARB_texture_env_combine
FOUND: ARB_texture_env_add
FOUND: SDL_GL_SetSwapInterval
FOUND: EXT_texture_filter_anisotropic
FOUND: ARB_texture_non_power_of_two
FOUND: GLSL

Sound Initialization
SDL audio spec : 44100 Hz, 1024 samples, 2 channels
SDL audio driver: alsa - HDA Intel PCH, ALC3239 Analog, 65536 bytes buffer
Audio: 16 bit, stereo, 44100 Hz
CDAudio disabled at compile time

========= Quake Initialized =========

execing quake.rc
execing default.cfg
execing config.cfg
couldn't exec autoexec.cfg
3 demo(s) in loop
Shutting down SDL sound 

Any luck with increasing the MAX_GLTEXTURES limit? Not sure if anyone's looked yet or if it is pretty embedded. 

Alright, explicitly specifying a 'buffer_size' in my /etc/asound.conf seems to have fixed my audio issues. 

MAX_GLTEXTURES is just a define, but I find it difficult to believe that you're genuinely using over 4000 textures. There must be a problem somewhere else with your content that's falsely triggering this. 

It's in my asset-library/feature-test map. Is it a memory limit on level load? Because if I add more unique stuff, it exits to console on map load. Not sure if there is a workaround where I could reference .mdl's or .spr files with text but only load them when the player enters the room and unload them when exiting...I'd prefer not to use killtarget but that might be my only reliable option to limit the textures loaded in memory. Or am I misunderstanding how that define is used? 

This I guess depends on your content.

Each .spr frame is a unique texture.
Each .mdl skin is a unique texture.

With, I guess, some extreme cases, it probably is possible to overflow a 4k texture limit; say if you have some sprites with 256 frames each - 16 of those would overflow.

So I suppose you'll need to talk a little bit more about what kind of content you have, because 256-frame sprites seems a pretty extreme example. 

I have a hall of effects with about a hundred looping sprites to show what kind of effects are possible, a hall of items, hall of enemies, etc. I have no doubt that I'm using every bit of 3999 textures at the moment. If I add one more sprite or one more model it gives me that error. Some sprites have frames up into the 90's, can't recall if any are close to 256.

Do textures repeat...e.g if I have two different types of ogre models but the skin is the exact same on each does ot still count as 2? (I assume yes)

I may have to settle for scrapping my hall of effects :( 

Oh also, do textures loaded from the bsp count too? 

image loaded from a file is a separate texture even if the pixels are the same. So your two ogre skins would be counted as 2. 

P.S. if you want a list of those 3999 images, type the "imagelist" command in the console. The names listed should give an indicator of the source of each image. 

Hi, community!
Im used QS 0.93/0.93,1 x64 on my HP laptop with win 7 x64 pro.
After shifting to Win 10 x64 pro I encountering a permanent problem with my mouse: plugged into USB 2.0 port it turns off after one-two min. running QS (LED still lighting, but not moving cursor, after exit QS to desktop - still not works): plugged into USB 3.0 port - mouse moved with freeses and delayes.
Reading this thread shows, that problem encountering many people, and bug rather in sdl2.dll
Im try any QS builds: x86, x64, sdl12 and sdl2 based, but problem still remains.
When Im trying QSS 093.1 , with included sdl2.dll (v.2.0.9) mouse turns off after about 30 min of running Quake. Current version of QS 0.93,1 with sdl2.dll (v.2.0.9) has no sound.
How to resolve problem with it?
My config:
Laptop HP Win 10 x64 pro 1809 (up to date)
core i5 3340m
16gb ddr3 1600
Radeon HD7570 1gb ddr5
Intel USB controller 3.0/2.0
mouse logitech b100
All that works on win 7 x64 pro before. 

Hi, community!
Im used QS 0.93/0.93,1 x64 on my HP laptop with win 7 x64 pro.
After shifting to Win 10 x64 pro I encountering a permanent problem with my mouse: plugged into USB 2.0 port it turns off after one-two min. running QS (LED still lighting, but not moving cursor, after exit QS to desktop - still not works): plugged into USB 3.0 port - mouse moved with freeses and delayes.
Reading this thread shows, that problem encountering many people, and bug rather in sdl2.dll
Im try any QS builds: x86, x64, sdl12 and sdl2 based, but problem still remains.
When Im trying QSS 093.1 , with included sdl2.dll (v.2.0.9) mouse turns off after about 30 min of running Quake. Current version of QS 0.93,1 with sdl2.dll (v.2.0.9) has no sound.
How to resolve problem with it?
My config:
Laptop HP Win 10 x64 pro 1809 (up to date)
core i5 3340m
16gb ddr3 1600
Radeon HD7570 1gb ddr5
Intel USB controller 3.0/2.0
mouse logitech b100
All that works on win 7 x64 pro before. 

I made a quick patch to QS to make it use the unused flashing frames for the keys and powerups when you pick them up. I also added a flash for when powerups expire, which is hardcoded at 29 seconds. TODO: I should really consider that as a cvar or read it from the quakec field for mod purposes.

https://youtu.be/e661Xsy934o

Modified sbar.c is available at https://pastebin.com/Ev0eNp21, very few changes are marked with // c0burn 

2nd link is busted