Wow, thanks for the feedback guys.

@Baker "But you can't do it that way. Some mods print 20 lines of center print."

Simple "if (y < 0) y = 0" check takes care of that :)


A cvar to disable the weapon offsetting back to regular QS behavior is simple enough.

As for the wide-screen HUD, maybe it's not worth it after all. At least the regular tiling border is a close enough color to begin with (unlike Doom)


As for center print positioning I guess that's a personal preference sort of thing. I guess I just don't like text obscuring where I'm shooting.


Can cvars have multiple callbacks? If autoscaling was made a cvar it would be handy if any changes to the regular scaling cvars would disable it. 

no way. those empty boxes would drive me nuts.

why even show the border at all? just remove the brown areas on the side of the sbar and float the sbar in front of the screen. 

why even show the border at all? just remove the brown areas on the side of the sbar and float the sbar in front of the screen.

Yeah, that would be my first thought too :P 

It's a "What do I need to find!?" OCD thing. 

Omicron Bots mod has a feature Quakespasm can't use.

"registered 2 - the patch does not load the models supplied with the bots"

You can't set registered 2 in Quakespasm.

Reference

Omicron Bot Mod Download 

Finally committed this! Windows builds available here ( r1293): http://quakespasm.ericwa.com/job/quakespasm-sdl2/

I'll need to add some documentation later, here is a first stab though:

Cvars:
* joy_deadzone - fraction of the stick travel to be deadzone, between 0 and 1. default 0.2.
* joy_sensitivity_yaw/pitch - max angular speed in degrees/second. Defaults are currently 300 for yaw (turning left/right) and 150 for pitch.
* joy_exponent - for the look stick, the stick displacement (between 0 and 1) is raised to this power. Default is 3. So a value of 1 would give a linear relationship between stick displacement and fraction of the maximum angular speed.
* joy_invert, joy_swapmovelook - enable to swap the move/look sticks or invert the look stick. Default is move on the left stick, look on the right stick.

Buttons:
Some of the controller buttons are hardcoded: back=TAB, start=ESC, dpad=arrow keys. The others are normal bind-able keys: L/RTRIGGER L/RSHOULDER, L/RTHUMB (pressing in the sticks), A/B/X/YBUTTON.

quakespasm.pak's default.cfg has been updated to give some default bindings, so make sure to install the quakespasm.pak. L/R shoulder buttons are bound to weapon switching, L/R trigger are jump and attack. A and B are hardcoded to operate the menu, but they're not bound to anything in game by default. If you choose "reset config" in the menu, these default bindings will be loaded, and I think "exec default.cfg" will also do it.

Other stuff:
The key bindings screen in the menu now supports 3 keys per action. This could be annoying for non-controller users, so maybe controller bindings/settings should get their own menu page. I just try to avoid adding things to the menu if possible.

Anyway feedback is welcome! Especially, are the default sensitivity/acceleration settings good? 

Amazing, this feels really responsive on the default settings. I blasted through episode 1 and I don't feel like I was hindered too much by the pad.

I bound jump to LT and shoot to RT and it was great. I wanted to have weapon up and down on X/Y but for some reason weapon down doesn't work??

I'm really hoping that at some point we can get split-screen working 2-4 player so I can run "lan" deathmatches and co-op from a single pc set up. I'm not sure how you would implement multiple pads but this would be a dream come true IMO.

Yes, I still play games in the old-school console way with my buddies even though I'm an old codger. ;) 

Here's a demo of me playing through Episode 1 with a pad -

http://www.quaketastic.com/files/demos/5thpaddemo.zip

As you can see I didn't really have much trouble, admittedly I can go through a bit quicker with the keyboard and mouse but it's still fun. In-fact it's almost more fun because of the slight handicap, some of the challenge was reintroduced. 

Awesome, glad to hear! Not sure why weapon down didn't work.
Yeah, local multiplayer would certainly be cool to have for lan parties.

I've had a lot of fun testing this too, played a few maps from AD with it while working on it. 

Possible feature?

Instead of weapon cycle it could be interesting to use the D-Pad to cycle through weapons.

Left = SG/SSG switch
Up = NG/SNG switch
Right = GL/RL switch
Down = Axe/LG

It will be a little bit like a weapon wheel but less crappy. 

Years ago there was a way of getting splitscreen to work on Quake 2 I think it was. The implementation was a bit funky, you opened separate executables and there was a window that allowed you to input the in-active window as well as the active window. You connected to your own pc through your LAN.

I tried searching for it but all I could find was this Quake 3 Arena source port that has native split-screen -

http://spearmint.pw/ 

 

Open up 2 Quakespasm clients.

Use the new borderless feature.
Carefully position the windows and then toggle the borderless. Do this twice.

For the Window you touched last, the player uses the mouse and keyboard because only the active window can actually receive keyboard and mouse input in Windows.

For the Window you didn't touch last, the player uses the 360 controller. This will work because I suspect the 360 controller code won't check to see if it is the active window (but I didn't look) because the original Quake joystick code never did.

Now the guy using the mouse is going to own the 360 controller dude, so play coop.

You might want to set sv_aim 0.93 (the default Quake sv aim) so the 360 controller dude gets a little bit of aim help. 

D-Pad weapon cycling could be hacked in like this:

alias ng1 "impulse 4; alias ng ng2"
alias ng2 "impulse 5; alias ng ng1"
alias ng ng1
bind leftarrow ng

That would make leftarrow cycle between NG and SNG. The problem is you might have to tap it twice if you have the SNG but not the NG, the first press would try to select the NG.
Not sure if that can be improved on without doing it in QuakeC.

I can add a cvar to select which controller number is used, I assume SDL2 properly handles multiple controllers plugged in. Running multiple QS executables as Baker mentioned might work OK, I'm not sure if the background window gets joystick events, need to check. Also, currently sound is muted when a QS window loses focus. 

If the mouse/keyboard computer ran Quakespasm older Quakespasm without controller support and the 360 controller window ran newer Quakespasm with 360 support ... 

typo: not "computer", "window". 

you could do it like

bind leftarrow "impulse 4; wait; impulse 5"

This will pick SNG if available or NG otherwise, or do nothing if you have neither weapon. 

failed at my own board markup!!! 

I think native support would be more desirable than workarounds. The quake 3 source port shows its feasible. 

Looks like FTE has splitscreen support... would be interesting to see if controllers work with it! 

Sorry to do this again, but I went to try this out and Windows Defender is shitting itself again. it claims to find:

Trojan: Win32/Pocyx.gen!C!plock

in SDL2.dll

This is from downloading this build: http://quakespasm.ericwa.com/job/quakespasm-sdl2/lastSuccessfulBuild/artifact/quakespasm-r1294.zip

I'm sure it's nothing, but is anyone else having issues? 

Well I just tried sending that link to an online virus scanner and everything seems to check out, so

wtf is wrong with my windows defender? 

nload 

Ok...any idea why it would only pick on quakespasm downloads? 

Do you mean controllers working w/ splitscreen particularly, or FTE in general?

FTE seems to have controller support: http://www.celephais.net/board/view_thread.php?id=60452&start=1781

...but I haven't tried it myself.