Func_Msgboard: Mapping Help

Posted by metlslime on 2002/12/23 18:31:29

This is the place to ask about mapping problems, techniques, and bug fixing, and pretty much anything else you want to do in the level editor.

For questions about coding, check out the Coding Help thread: https://www.celephais.net/board/view_thread.php?id=60097

First | Previous | Next | Last

#19004 posted by ericw on 2017/10/15 19:59:19

The transparent parts need to use palette index 255 (bottom right of http://www.celephais.net/stuff/palette.gif )

And Start The Name With {

#19005 posted by Qmaster on 2017/10/15 23:45:01

Clear Parts

#19006 posted by madfox on 2017/10/16 00:22:01

Transparent textures in sprites works the same way,
with the pink lower colour in the quake.pal.
So a small sprite for a fagot would look like this
In game it would appear like this, if the progs is changed.

A small and good viewer for editing sprites is Fimg.
I just added to quaketastic, as I couldn't find it there.

FirmG

Got It!

#19007 posted by Redfield on 2017/10/16 01:07:38

Its working now, I also forgot to enable fullbrights in TexMex and it was screwing with indexed colour. It looks ok now, as far as a tree made out of func_illusionaries looks... Hopefully this will be ready for December.

Couldn't Exec Autoexec.cfg/ Couldn't Spawn Server Maps/test.bsp

#19008 posted by Winkyjuice on 2017/10/16 19:32:30

Hey guys i'm new to quake mapping and new to quake in general. I started mapping because i'm really sick atm having a crohn's flare up and tendinitis in my left shoulder. Now I was using this guide http://steamcommunity.com/sharedfiles/filedetails/?id=805664376
to get into mapping and downloaded trench broom/tryUtils/ne_q1spCompilingGui/quake.wad to start making levels.

well i made a level in trench broom and everytime i try to compile i get the error message "couldn't exec autoexec.cfg" then it says "couldn't spawn server maps/test.bsp" and "3 demo(s) in loop" I really want to get into mapping because i have nothing else to do really in the hospital I heard this is the place to go for help i'd really appreciate it if you guys could help me with this.

Couldn't Exec Autoexec.cfg/ Couldn't Spawn Server Maps/test.bsp

#19009 posted by Winkyjuice on 2017/10/16 19:32:32

#19010 posted by ericw on 2017/10/16 20:29:22

Compiled maps (.bsp files) need to go in "quake\id1\maps".
That guide seems to have you place the .map file into "quake\id1\" which is werid. I would just save your .map file in "quake\id1\maps", then after compiling, you should have "mymap.bsp" in "quake\id1\maps".

Autoexec.cfg

#19011 posted by Qmaster on 2017/10/16 22:06:14

Is not needed. That's only if you want to run your own console commands when the game starts (like -developer 1 if you are coding)

Autoexec.cfg Even More Trouble

#19012 posted by Winkyjuice on 2017/10/16 23:13:41

okay so I figured out a bit more of the issue it isn't that quakespasm isn't reading my maps bsp or that the bsp is going into the wrong folder, the issue is that my map is having an issue compiling a bsp.

so I was looking at the n_q2spcompilinggui and it has an option for you to pause after compiling and i did that and noticed that it wasn't even compiling the bsp. This is the error that pops up on the command prompt.
------------qbsp-------------
C:\Program is not recognized as an internal or external command, operable program or batch file
the system cannot find the file specifified (it repeats this 3 times and then says press any key to continue)

so the issue is with the bsp tool do you guys know how to fix it?

Autoexec.cfg Even More Trouble

#19013 posted by Winkyjuice on 2017/10/16 23:15:50

oh and right above where it says
-----------------qbsp---------------
in the command line it says
"the system cannot find the file specified
converting map..."

Autoexec.cfg Even More Trouble

#19014 posted by Winkyjuice on 2017/10/16 23:15:54

oh and right above where it says
-----------------qbsp---------------
in the command line it says
"the system cannot find the file specified
converting map..."

#19015 posted by ericw on 2017/10/16 23:32:14

C:\Program is not recognized as an internal or external command
indicates it is a paths-with-spaces issue.

Easiest fix might be to copy your quake install to c:\quake.

#19016 posted by Winkyjuice on 2017/10/17 00:01:13

how do i go about copying my quake install to c:\quake? do you mean taking the file out of the steam folder and moving it to... where exactly?

Installation Problem...

#19017 posted by Redfield on 2017/10/17 00:08:09

@Winky

Because of the error you are getting when trying to run qbsp using necros' GUI I am willing to guess the following:

A) You have not installed the compiling tools on your computer. The GUI is only an interface, you still need to get qbsp, VIS and light tools from the internet.

B) You have installed the tools but did not enter the path into the GUI. Go to Settings, Folder Setup, and select the compiling tools qbsp, VIS and light from the folders they are located in on your computer.

This should solve the problem. You do not need to move Quake out of STEAM just to compile a map. If this does not fix your problem, there may be other issues going on.

Reply Installation File

#19018 posted by Winkyjuice on 2017/10/17 00:24:03

okay so looks like i am a god damn idiot i did have the tools but forgot to specify (which i could have sworn to god i did!) but now i have a new fucking error!

the command line comes up and says

Copying files...
the system cannot find the file specified
converting map...
-------qbsp-------
-----qbsp / tryutils v0.5 ----
input file: testmap
outputfile map.bsp

---loadMapFile---
XXXXXXXXXXXX ERROR XXXXXX
failed to open test.map: no such file or directory
the system cannot find the file specified (repeats this three times)

so I got the bsp part working but now it won't load the map file but at least we got a step closer (i think) jesus man is it this hard to edit quake levels or am i just unlucky lol?

Reply Installation File

#19019 posted by Winkyjuice on 2017/10/17 00:24:04

Reply Installation File

#19020 posted by Winkyjuice on 2017/10/17 00:24:05

@Winky

#19021 posted by Redfield on 2017/10/17 00:32:28

Please only press the submit button once. It will only create spam when you do this.

I strongly advise against launching the map directly from the compiler. First you must determine where your output folder is. Again look at your compiler settings and see where the output folder is. This is where your finished .map goes to. This is NOT where your quake game folder is, and thus you cannot play this map. Now copy your finished map, and paste it into you C:/whatever/whatever/quake/iD1/maps folder. Now you can play your map. Launch quake and type map yourmapname.

This should fix it.

File Name

#19022 posted by Redfield on 2017/10/17 00:39:51

Looking again at your error it seems you have also not specified 2 things:

A) The .map cannot be found. This means you have not specified the correct working folder in the GUI where your .maps are located. Check Settings Folder Setup again to do this.

B)The .map doesn't exist. Check your spelling again, are you sure this file is even on your computer.

Redfield

#19023 posted by Winkyjuice on 2017/10/17 00:49:49

Yeah i keep doing it on accident it's because my computer is slow and I kept accidently spam clicking the submit button sorry about that I looked all over for a delete button i didn't mean to spam up the feed.

okay i did what you said and when i try to launch from quake spasm it says "can't load test map.bsp" (my map name is test map) so i'm gonna tell you guys all the files where i have this gui pointing to.

i have source maps pointed to quake/id1/maps/test map
i have quake engine pointed to quake/quakespasm

working folder is pointed to steamapps/common/quake

output folder is poitned to quake/id1/maps

god i just wish this would fucking work

Don't Use Spaces In The Map Name

#19024 posted by Qmaster on 2017/10/17 01:02:19

And dont worry, we've all been there.

Lemme Try A Differen't Approach

#19025 posted by Winkyjuice on 2017/10/17 01:02:45

Is there a way i can just compile straight from trench broom????

You Can Do It This Way.

#19026 posted by Qmaster on 2017/10/17 01:08:20

Manual Compile:
Put qbsp.exe, light.exe, and vis.exe in a folder with your .map file.
Drag and drop .map onto qbsp.exe
Drag and drop the .bsp onto vis.exe
Drag and drop the .bsp onto light.exe
Manually cut and paste the .bsp into your ..../id1/maps or alternatively .../<mod>/maps such as AD/maps.

No Spaces

#19027 posted by anonymous user on 2017/10/17 01:09:35

You cannot have spaces in a map name. You must use underscores in this case.

-First: Have you compiled the map without errors? Do you have testmap.bsp ?? You cannot play anything ending in .map Files that end in .map are not maps and cannot be played in Quake.

-You should create a separate special folder for your .map files. NOT in your id1/maps folder. This will create confusion. Only finished .bsp files go in your id1/maps folder.

-Confirm that you can compile testmap.map into -----> testmap.bsp This .bsp goes into your id1/maps. Only now can you play the map.

I MADE THE LEVEL A .BSP FINALLY!!!!!

#19028 posted by Winkyjuice on 2017/10/17 01:23:41

OKAY! so i listened to qmaster and just manually did it and i made the level into a .bsp file now i dropped it into id1/maps now i just need to know what i type into quake spasm to launch the level?

First | Previous | Next | Last

You must be logged in to post in this thread.