 News | Forum | People | FAQ | Links | Search | Register |
Log in |
|
|
There is a hack. Using the ammo_touch</a> as touch function in a custom info_notnull trigger, it will print "You get the" + whatever is in the netname field in the top left corner of the screen. This will not override the pickup message of the original item, so you'd have to make sure the trigger fires after picking up the item. Additional steps may be possible to hide the original message entirely.
@Mugwump
I'd had a couple ideas for making a map somewhat unique without needing its own -game switch; just small things like alternate item pickups outside of the standard gold/silver keys and ammo boxes through either stationary brush entities that are killed upon touching it or fancier, rotating brushes (cloned from a func_wall using this fantastic hack) to imitate the actual spinning keys. @negke That's fantastic, exactly what I was looking for! Getting rid of the 'You get the X' part of the message isn't a priority, as I would have ended up typing it in anyway; using ammo_touch as the touch field on a DIY-brush-entity makes a one-time trigger that not only gives you the message with your choice of 'X', but also plays the ammo pickup sound and screen flash. A little bit of fiddling shows that if you use key_touch instead, it allows you to use the noise field to play any (precached) sound you want instead, including the various key/armor pickup noises. It says Radiant now has Quake support (I know Eric made is, I tested it) but when I download it, I can't configure it for Quake. It doesn't show up in the list of supported games and there's no separate gamepack to download because the site claims it's built in.
What gives? I fail to see how centerprints moved to the top/console would relate to alternate item pickups.
As for alt keys and rotating brushes, AD can do that so you could make your map for AD instead of vanilla. So, I've been making my first map in Trenchbroom and Necro's Compiling GUI refuses to compile the map now. It gives an error message:
*** WARNING 01: No valid WAD filenames in worldmodel Processing hull 0... ---- Brush_LoadEntity ---- 371 brushes ---- CSGFaces ---- 2249 brushfaces 1974 csgfaces 1791 mergedfaces ---- SolidBSP ---- 126%************ ERROR ************ Didn't split the polygon (SubdivideFace) --------------VIS--------------- ---- vis / TyrUtils v0.15 ---- running with 4 threads testlevel = 4 ************ ERROR ************ Error opening eldertemple.bsp: No such file or directory -------------LIGHT-------------- ---- light / TyrUtils v0.15 ---- running with 4 threads ************ ERROR ************ Error opening eldertemple.bsp: No such file or directory The system cannot find the file specified. The system cannot find the file specified. 1 file(s) copied. Any ideas? Oh, and textures show up fine in the editor, plus the
Supposedly there's a weird brush somewhere or something but how would I find it? Is that even the problem? For Quake1 it's better to use the earlier versions of GtkRadiant.
Version 1.4 supports Valve half life and Quake. Version 1.5 also supports Quake. I can only create maps in it, as the links are rather queer to make. Texture files give possibility to 2 wad files, Quakewad101 and one of your own. It's a bit stubborn installing, but a very accurate editor. https://goo.gl/UyXRUJ
https://goo.gl/UyXRUJ http://celephais.net/board/view_thread.php?id=61357&start=77 Recommending any other radiant is retarded. I dropped the ball a bit, the 1.6.5 release shipped without the Q1 gamepack.
This was the game pack I prepared, just extract it in the "installs" directory with the other gamepacks and Q1 should work. https://www.dropbox.com/s/uj8iewxy2q7ozmt/Q1Pack.zip?dl=0 Oh, and textures show up fine in the editor, plus the
Supposedly there's a weird brush somewhere or something but how would I find it? Is that even the problem? I think you may have spaces in the path to your wad that TB can handle but QBSP.exe cannot. I'm guessing here... but the wad error at the top of the log is what you should correct and then see if there are further errors. I solved this (well, someone on QuakeOne did...) just now. It was because one of my brushes was weird. I can only conclude that it was something to do with the fact that I messed about with the texture scale in the wrong way.
I have three more questions. :D
First question: How would I go about building composite lifts - I.E. lifts made up of multiple brushes (such as a main platform, a thinner pillar brush below and a CLIP brush the same width and length of the platform but lower)? Because when I tried doing it normally with multiple func_doors, some of them raised back up at different times + other oddities, presumably because of their differing volumes. The second question is: Is there a "block light" brush? Yeah, that's it. The third one is: how would I go about making teleporter traps? (Where enemies teleport into the level) le niger from q3df updates it. He added lots of q1 stuff a few months back. Pretty much good to go once if you have tyrutils-ericw compiler stuff
1. do all your brushwork then make it a func_door or a plat - you can even go in and edit the brushes later in TB2 anyway. Not sure if clip brushes can be part of a func_door. Never tried that and not sure why you'd need to.
2. I don't think so but there may be some kind of hack I am unaware of. I know that ericw is actively working on his compile tools. There may be something there to query. 3. AD and Quoth have ways to spawn in monsters but this is for id1: First make a room outside of your main map and place your monsters there. For each monster you place them in a trigger_teleport. I do mine like a little box intersecting their midsection. Make sure you leave some space (4 units minimum) between each monster and that the triggers never overlap. All of these triggers touching the monsters will have the SAME "targetname." Now enter a unique "target" in each teleport_trigger. Next you need teleport_destinations for each monster's trigger_teleport. In the "targetname" field of each destination enter the "target" from each unique trigger_teleport above. Last you need a way to trigger the monster's trigger_teleport brushes. Let's just call it a trigger_once as your player enters a room. Remember above all the trigger_teleport brushes have the SAME targetname? Make that name your "target" in this trigger_once. I know it sounds confusing but ask if I can clarify. It's harder to read than to do trust me. :) It's very easy to confuse target with targetname so just double check each step. And try to do one monster as a test first so you get the method down. Also download the original map sources from id here at Quaddicated. Load up a map you know well and then check out how id did it. E1M3 has the above "monster traps" method. negke, you mentioned a while ago that the
yeah clip brushes can be part of func_door. I've used it to 'simplify' floor of my elevator. I initially built it with two metal beams crossing main platform slightly rising above it. Then I found out that player is getting stuck on those. I solved it by encompassing the entire thing in one clip brush))
Ok so work on my map Paradise Sickness for AD continues, I've ran into a little bit of trouble however. I find the minion spawners to be extremely difficult to fight against, and I am not using respawning ammo on the map (yet) to balance this I have tried setting the "minion_maxcount" key on my wraith set to 1. This wraith spawns evil little scorpions that do a number on your health.
The problem is, even though this key is set to 1, the wraith always spawns 3 scorpions no matter what. This wraith appears on hard mode, with a wraith on normal/easy spawning 2 spiders. I thought that maybe the "minion_maxcount" was adding between the two wraiths, or overriding each other, but changing these numbers had little effect. I always get 3 scorpions. So far I've balanced this by giving the player a sh*t load of shells. Does anyone know what is going on with this key? Second problem. My map is an archeologicl base built around Egypto-ruins. I am trying to use both base health packs and wooden health packs. I am using skin_override on the health to select the skin but it doesn't work. All the health appears as base style according to the world type. Any ideas here? Thanks, Redfield. 1. AD always overrides your minion_maxcount to be 3.
2. So long as worldtype is less than 2 AND you have skin_override set, you should be able to use custome skin I believe. Otherwise, you could info_notnull it.
|
|
| You must be logged in to post in this thread. |
|
| Website copyright © 2002-2024 John Fitzgibbons. All posts are copyright their respective authors. |