#1405 posted by Baker on 2014/11/08 04:05:37
@metslime ... I don't think it does even now with Quakespasm's ingenious content protection scheme.
#1406 posted by ericw on 2014/11/08 04:49:57
I think QS already does what metl suggested; here's a comment from gl_model.c:
// use ent file only from the same gamedir as the map
// itself or from a searchpath with higher priority.
#1407 posted by metlslime on 2014/11/08 09:04:16
yay, problem solved.
QS seems to run significantly slower after I die and reload the map. How come?
Very Weird
#1409 posted by ericw on 2014/11/14 19:46:28
Shouldn't happen, I'd like to be able to reproduce that. Can you give me a scenario where it happens, like any command-line flags (heapsize), mod/map. Assuming the win32 0.90 exe? You're just pressing space to restart when dead, not loading a save? Can you see an increase in the frame times reported by r_speeds?
Powerup Flash
#1410 posted by ranger on 2014/11/15 17:49:35
what console command disables the screenflashes when grabbing powerups?
#1411 posted by anonymous user on 2014/11/15 20:06:56
gl_polyblend 0
Wait What?
#1412 posted by necros on 2014/11/16 01:08:24
the powerup flash is built in and can't be disabled.
although, amusingly, if you type 'bf' into the console, it will play it.
My Bad
#1413 posted by necros on 2014/11/16 01:09:58
i forgot, but it's not actually 'built in', but is part of the progs.dat.
The code actually sends a 'bf' console command when you pick up items. In theory, you could make a mod to disable it.
Or In Theory
#1414 posted by Preach on 2014/11/16 01:50:58
You could also create a modified engine that makes "bf" a command that does nothing - or have a cvar that introduces that change. I read ranger's post as looking for such a cvar, dunno if it's an existing feature in quakespasm or elsewhere...
Minor Issue With Joined Console Commands
#1415 posted by Pekka on 2014/11/16 20:52:20
This one is a really minor issue. It's about as non-urgent as they come, since working around it merely requires typing in the console commands separately.
I noticed that you cannot autocomplete map names when joining multiple console commands using a semicolon. The following happens to me on QS 0.90 using the Quoth mod as an example. Any collection of Quake maps will do.
I start the engine and enter the command "game quoth". There are now maps titled breakable, e1m1quoth etc. available to launch from the console. If I type "map " (including the space), I can press tab to autocomplete them. This works as intended.
Let's say I want to play on Hard. I type "skill 2; map " and try to autocomplete the maps now. It doesn't work. It only offers to autocomplete commands instead of map names, which isn't right in this context. If I type in a proper map name, the commands still work, as you'd expect.
Presumably the autocomplete logic considers the whole console command line and not the part after the last semicolon. This would be a nice little thing to fix if you revamp the autocompletion feature some day.
Uneeded Levelshots
#1416 posted by ranger on 2014/11/23 01:09:10
SQ saves unneeded levelshots TGAs in the game's maps folder.
These image are never seen ingame and the files take up space, so QS should not generate these files anymore
QS Crash
#1417 posted by mfx on 2014/11/28 21:00:50
texture coords on a brush were:
16777740 1584.00 832
don�t ask...
FitzMKV crashed too.
What The Fuck Is That
Looking For Testers
#1419 posted by ericw on 2014/12/19 06:12:22
I was wondering if anyone with AMD/ATI cards could try this build for me (I've tested some intel and nvidia cards already, but if you have those you're welcome to try it too):
http://quakespasm.ericwa.com/job/quakespasm-alias6/lastSuccessfulBuild/artifact/quakespasm/quakespasm-rbe2d155ae59744afad9faf79e5d9b82e1f54430e.zip
It has the alias model speedup I've been working on (only requirement to get the speedup is opengl 2.0+), so a good map to test is jam3_tronyn from map jam 3, with its 120k epoly. A good commandline would be:
"-heapsize 256000 -game jam3 +map jam3_tronyn"
then check the first number of the r_speeds when looking at the demon face. If it's not too much trouble, checking the r_speeds with QS 0.90.0 for comparison would be great too. With any luck, the frame time should be half of what it was in 0.90.0. Thanks!
Continued..
#1420 posted by ericw on 2014/12/19 20:26:25
Ok Here
I guess you mean the start of jam3_tronyn. On my HD 6750 it improves from (some version of 0.90) ~ 13 ms to under 5 ms.
Havent played that map yet. Third of the way through now... Not bad :)
Add SDL_WINDOW_BORDERLESS
#1422 posted by LeopolD on 2014/12/20 17:36:47
in line 505 of vid_glsdl.c, can you please add SDL_WINDOW_BORDERLESS to flags? Makes it possible to run without window decorations in window mode, useful for dual-head setups when playing on non-primary monitor (for SDL2, i built it with USE_SDL2=1).
#1423 posted by ericw on 2014/12/20 22:25:40
@stevenaaus, thanks for testing - that looks like a good speedup!
@LeopolD, sounds like a good idea, we maybe could have a vid_borderless cvar.
#1424 posted by LeopolD on 2014/12/21 09:06:29
That would be even better:)
R_speed Test
#1425 posted by LeopolD on 2014/12/21 09:20:25
Went from average 69.15 to 12.21 on a 6770 using OSS radeon drivers.
Pulling the console down almost doubled the value on the old build while the test build kept the rate.
Gamma And Runes Problems.
#1426 posted by Bloodbat on 2015/01/01 04:02:00
Hi! Thanks for all the hardwork in the port :) however, I seem to have come across two problems:
1.-Gamma isn't respected unless the engine is set for 16 bit color depth; if using 24 the gamma slider works and the gamma console command indeed changes the brightness, the gamma value is saved, but ignored when exiting and restarting the game (or rather reset when the vid_restart occurs in config.cfg), it's a bit annoying having to reset the gamma (by typing gamma 1 to "reenable it": the engine assumes the value it read is already there [despite being ignored] and does nothing, and then gamma 1.35, since the slider won't go above 1 and 1 is to bright, could these values by fixed, too?) every time I start the game.
2.-My runes disappeared! I finished episode 3 (after finishing 1 and 2 beforehand) and noticed the bars weren't there...true enough...no runes. Sure it can be fixed by impulse 11 (and I know it can happen in vanilla Quake), but it's annoying nonetheless.
The engine I'm using is the latest stable Windows 64 bit build, SDL 2 with a GeForce GTX 750 Ti using the latest drivers (347.09 at the time of writing). It may or may not interfere that I do have the drivers set to use NVidia color controls (since allowing "other programs to control color" makes the desktop [and mostly everything] look like ass). Other games have functional (or not ignored) gamma controls.
Thanks in advance :)
@Bloodbat - Runes Disappeared
#1427 posted by mh on 2015/01/01 16:57:29
Did you use the "kill" command at any stage? This is an old Quake bug where the "serverflags" field is wiped by using kill, and I guess that QS hasn't fixed it.
@mh - Disappearing Runes.
#1428 posted by Bloodbat on 2015/01/02 05:27:57
Nope, no kill command. The only command I've used is vid_restart and some screen related cvars (including, obviously, gamma) for dealing with and testing the other problem I mentioned.
Bsp2 Leafs
#1429 posted by negke on 2015/01/06 09:47:58
I'm getting an error trying to load a BSP2 map that exceeds 64k leafs. Shouldn't this limit have been raised (or abolished) for BSP2?
|