Thanks Spirit, I'll try, but I tought there is something easier. Oh well...

And another thing. How can I fix this warning ?

WARNING: CutNodePortals_r: New portal was clipped away near (-160 -752 1184) 

Easier solution that's actually more difficult: put a shootable trigger with a very high wait value in front of the door and (optional but recommended) make some other entity trigger it so it doesn't bleed if the player shoots it. Then killtarget it with the button.

That warning is caused by awkwardly intersecting or misaligned brushes. You can ignore it in most cases, but it wouldn't hurt to examine the brushwork around those coordinates, either. 

Note that not all compilers allow that. BJP's are fine, but hmap2 reports a leak, for example. 

neg!ke, I don't think it's a leak. I took a look, there's nothing interesting near those coordinates, there's only some simple bars, nothing fancy. 

No, that leak note was meant for necros.
Also, what's with everybody not realizing the ! is gone... :P 

haha wow, i never knew about that! thanks! 

Sorry, I know you for your maps for a long time, I got used to neg!ke :P 

I was the one who re�ntroduced it neg!lke,
after my lame blame lang blah, haha. 

I may be mistaken, but I can't hear any water or wind sounds (e1m1 for example).
I reinstalled Quake, nothing.
Set ambient_level to 1, still can't hear them. But I can hear the drip and torch sounds though from like e1m2. 

It's not a problem, in e1m1 there aren't ambient sounds (water or wind). There are some buzzing sounds, but you have to be close to the "source".

As long as you can hear ambient sounds in other maps it's ok. 

I can hear: suck1, swamp2, drip1, windfly etc, just not wind2 or water1

Those are the only 2 amb sounds I can't hear (I mean, I swear you could hear water2 when you cross the bridge in e1m1);
What maps have wind2 and water1 amb? 

yes, dunno what 10112 was about but you can hear the water and wind sounds in e1m1.

note that the water and wind sounds are defined in the vis process, so if you've been messing with the bsps, i'd venture to say you probably wrecked that, although i can't imagine how if you were just renaming the maps. 

I reinstalled Quake, nothing.
Set ambient_level to 1, still can't hear them. But I can hear the drip and torch (and even fl_hum1.wav) sounds though from like e1m2/e1m1


I didn't edit the maps yet, they are still stock Quake's.


I'm using Joequake, but I also tried with Winquake and even Shareware Quake. I did the testing with my volume max, and did "snd_show 1" to double check if those sounds were playing. When I used "soundlist" it displayed that wind2 & water1 were precached. No errors were displayed in the console. I tried replacing the sounds with other wavs files even. 

Tried a different engine then? Or a blank config? I can hear them just fine with Joequake. 

Or are you running a mod? Or have the paks/wavs been tampered with - perhaps the loop information got lost? Shouldn't be the case, though, if you reinstalled the game from a clean source. 

Like "c:\games\quake\" instead of "c:\quake\".

That way you will be able to rule out the theory of mods interrupting the sfx 

I tried with Winquake;

I don't know about the loop information hypothesis, because wouldn't it say "blah.wav is not looped" in the console?
I'm running stock Quake (at s_khz 22). I even tried running with the SW Quake's pak0 & Quake's pak1.

AUTOEXEC
---
startdemos //demo1 demo2 demo3
cl_truelightning "1"
cl_bobbing "1"
show_stats "0"
cl_bonusflash "0"
skill "3"
ambient_fade "5"
ambient_level "1.0"
r_maxsurfs "6000"
r_maxedges "10000"
r_clearcolor "0"
r_novis "1"
r_wateralpha "0.5"
d_mipcap "0"
d_mipscale "0"
d_subdiv16 "0"
v_centermove "0.1"
v_centerspeed "400"
v_kickpitch "0.75"
v_kickroll "0.75"
v_kicktime "0.4"
showram "1"
showturtle "1"
sv_aim "1.00"
sv_idealpitchscale "1"
cl_upspeed "180"
cl_rollangle "2.5"
edgefriction "2"
scr_conspeed "2500"
scr_printspeed "16"
scr_consize "0.65"
bgmbuffer "16384"
menu_main

CONFIG
---
cl_sbar "0"
_cl_color "22.000000"
_cl_name "Ranger"
m_side "0.8"
m_forward "1"
m_yaw "0.022"
m_pitch "0.022"
freelook "1"
sensitivity "4"
lookstrafe "0.000000"
lookspring "1.000000"
cl_backspeed "140.000000"
cl_forwardspeed "140.000000"
s_mixahead "0.2"
s_volume "0.4"
bgmvolume "1"
viewsize "100"
fov "90"
joystick "0"
vid_resetonswitch "0"
vid_window_y "0"
vid_window_x "0"
block_switch "0"
vid_windowed_mode "0"
vid_fullscreen_mode "3"
_windowed_mouse "0"
vid_stretch_by_2 "1"
vid_config_y "600"
vid_config_x "800"
_vid_default_mode_win "7"
_vid_default_mode "0"
_vid_wait_override "0"
vid_nopageflip "0"
_config_modem_hangup "AT H"
_config_modem_init ""
_config_modem_clear "ATZ"
_config_modem_dialtype "T"
_config_com_modem "1"
_config_com_baud "57600"
_config_com_irq "4"
_config_com_port "0x3f8"
saved4 "0"
saved3 "0"
saved2 "0"
saved1 "0"
savedgamecfg "1"
contrast "1"
gamma ".65"
crosshaircolor "79"
crosshair "1"

This is really bugging me, I mean I never noticed those 2 sounds were not playing until 2 days ago, I was thinking "I don't remember start.bsp's skill hall being this quiet" 

I have Shrak, SoA, DoE, Aftershock installed too...

How does a mod disrupt it? 

I don't really think it's that because I installed SW Quake to see if it only affected CD Quake - I'm pretty sure I couldn't hear those 2 sounds in SW Quake


also got -heapsize 256000 & -zone 65536
if that helps 

tried running without that weird autoexec.cfg? 

Hey, it ain't wierd - it squeezes the max outta Quake...

Anyhow, I figured out the issue: ambient_fade "5"

after making it to:
//ambient_fade "5"
Problem solved... the odd bit is that, I added that line to the autoexec to solve the amb sound issue in the first place - well it's fixed now so, ok 

Reinstalling Quake is worthless if you keep your config files. 

what spirit said 

The part when I tried using SW Quake - It was just SW Quake with no cfgs or anything 

is it possible to make a func_door (or a plat?) toggleable in quake3?