Also, thank you dumptruck for that video, it's cool to see a summary of all the current projects since I am not plugged in enough to keep track of all of it. And I appreciate all the links you added below the video. 

That's all well and good but can it run Arcane Dimensions? 

I'm not sure if this is the right board, but can anyone help me set up Nehahra (the movie and game) for Mark V? 

Isn't it like any other Quake mod? What does the readme say? If you got it from Quaddicted I am not sure if the movie is included:

Hi,

This should be all the latest files and updates of Nehahra in one ready-to-go package. The former mess of files was just too confusing. :o) Expecting most people nowadays do not have the Seal of Nehahra movie installed I unpacked the pak0.pak. If you have the movie installed please make sure not to overwrite its pak0.pak with the one included in this zip!

I made all filenames lowercase for case-sensitive operating systems. I made nehahra/ to be the folder right in the zip instead of QUAKE/
The latest version of aguirRe's Nehahra engine was included, it is recommended for playing (glquake.exe, Version 3.08 Aug 2007). The readme for it is nehahra/readmeneh.txt You can find the latest version at http://user.tninet.se/~xir870k/

Enjoy!

Spirit
11 March 2008

What have you tried that isn't working? 

When I place the "nehahra" folder next to id1, launch with -game nehahra, and start a new game, it just gives me a black screen and the console says it doesn't recognize some of the commands. I watched a video and it should be playing a cutscene by that point.

How are you doing the different text colors btw? That's cool. 

You are very welcome. It was a fun video to make and the response has been insane. The algorithm picked it up. Over 100k views and I gained 2000 subs in 2 weeks because it it. For comparison, my next highest viewed video has around 64K views but that took nearly 4 years to get to that. Same with subs, 3000 in 4 years and 2000 in two weeks. Some great timing with this video I guess. 

I missed your response. Need more info. What engine are you using? What version of Neharah?

Also as far as the text colors, that's explained here. https://www.celephais.net/board/faq.php 

To run Nehahra mod in Mark V you must use -nehahra command line parameter, not -game nehahra.

I suggest also getting correct fmod.dll from Mark V page (somewhere in the middle there's a link): http://quakeone.com/markv/

Not sure if running the movie is the same, my guess that perhaps it is. Either way I think you can watch full Seal of Nehahra movie on youtube anyway. 

No worries now, I have it sorted. Great pack too! 

So Matthais Worch is over on the Quake Mapping Discord messing around with TrenchBroom and "updating" Beyond Belief and he's experiencing sorting issues where QBSP will show overlapping brushes with the "back" brush being sorted first. We think this is due to updates in QBSP since he's using GLQuake to test. Could someone point me to where this might have been discussed in the past? And if there's something that can be done in leu of using outdated compilers?

I am curious about it and it would save him quite a bit of work if he could figure it out. 

Assuming you're talking about transparent water - I think Quakespasm doesn't have any alpha sorting at all, things like portals behind water will just be drawn in whatever order.
Other than that I don't understand how QBSP can "show" anything. If two solid brushes were overlapping, only one surface should remain. If two different bmodels overlap you'll get regular z-fighting. 

I wasn't clear. It was late when I posted that.

In these very old maps, Matthias has overlapping brushes that used to display properly without z-fighting. Now the order is reversed and we're trying to figure out if it's QBSP that is the cause and if there's a way to reverse the order of which brush is chosen to display. It could be that he developed these in WinQuake and the rendering order was more "predictable" in that exe.

Some quotes:

it looks wrong in the editor, the brushes overlap. but back then, they overlapped "correctly" to prioritize the desired brush after compile. my maps were full of this stuff

i made everything in wireframe in Quest, couldn't avoid it really

Here's a GIF showing it. 

Still not exactly clear.
So, two worldspawn brushes occupy the same plane, and the smaller one used to take priority but now does not. If that is the problem, it must be QBSP, and whatever goes on in the editor or in the game is irrelevant (Trenchbroom will always flicker, and the game will always only show the face that survived qbsp).

Could be some sorting based on brush size. Maybe it used to be based purely on the order of brushes in the map file. Doesn't seem like there are any switches to disable it though. Probably only coders who have dealt with compilers directly would have an actual answer. 

In my experience, it seemed like the later brush in the map file would take precedence over earlier ones in the map file. So, it could be that editing those brushes re-ordered them in the file (at least in some editors, any modified brush gets moved to the end of the list.)

If he specifically creating brushes in the same order as before (wall then light fixture) and it's giving opposite results, that could be from a change in QBSP. To verify this I guess he could re-compile the unmodified map source and see if it gives expected results or the same problem that the modified maps have. 

I just downloaded Nehahra from Quaddicted through Mark V's console. It worked right away with "game nehahra". 

It doesn't work well though. After playing through a bit of it, I didn't get many of the voices. 

How come more code from Quake 2 hasn't been borrowed by Quake 1 mods?

Case in point; ladders and rotating brushes. Quake 2 got ladders right on its first try 25 years ago, yet AD has those godawful sticky catapult deathtraps. Quake 2 has really easy to use rotating brushes, yet both AD and Quoth both stuck with that horrendously buggy and limited system from the mission packs.

Scrolling textures is another Q2 feature that I'm sure would get a lot of use in Q1.

As somebody who only has some very basic coding knowledge, I'm just curious why these seemingly obvious solutions haven't been borrowed. 

Trying to watch this again :D
It's so long. The voice acting is hilarious. I've tried to watch it numerous times in my life. 

Solved a lot of that stuff engine side - rotatings especially.

Mh did it for RMQ engine, but that was spoiled since nobody wanted the mod.

The main thing is that it's hard to decompile the solutions from Q2 - you really need the source and a reason to do it.

The reason is usually supplied because a mapper wants feature X.

The best mod for mapper features was Q2 Lazarus - physics, weight, monsters improvements, custom monsters, custom monster flags, monster AI (including proper jumping and waypoints), new weapons, trains, drivable vehicles and a load of other stuff. It had (a lot) more features than HL1.

It also, unfortunately, never really had its potential tapped. The handful of mappers who used it just wanted to use the homing rockets flag.

Q1 has had a number of attempts at housing the various features in a single mod. Extras R4, Quoth, AD and the various other megamods all grabbed a few off the mapper wishlist.

Ultimately mappers don't want/use them though, which is a shame.

And yeah, Q2 is hard to decompile and does not translate to Q1 codebase. 

Is more entertaining than the MCU. 

I don't disagree with most of what ijed says, but mappers absolutely do want and use those feature-mods like Quoth, AD, Alkaline, and progs_dump. 

Software Quake prevents z-fighting by making all brush entities be clipped by the world brushes in worldspace. And this is only done against the world brushes, not against other BSP entities, which is why maps such as the ones in Contract Revoked have per-scan z-fighting issues in software Quake engines.

BSP entities such as func_wall are not "worldspawn" entities. Their brushes are stored in the map's BSP, but they're processed along with external BSP entities such as ammo boxes.

But anyway, with current hardware-accelerated Quake engines hitting a thousand frames per second, it's a shame that none of them uses some CPU code to clip the brush entities' polygons against the world like WinQuake did. That would have zero performance impact for the world itself.

Scrolling textures is another Q2 feature that I'm sure would get a lot of use in Q1.
Retroquad has it, using the [ and ] characters in texture names to indicate negative and positive scrolling for both axes.

DP and FTEQW likely supports it in some other way, maybe through Q3A shaders. But I don't remember any engine specifically using Q3A shaders in Q1 map formats. 

Proper rotating brushes would be great, but the Q2 solution relies in the q2bsp format. They store original brushes in there so that the engine can expand them in realtime. If you search for "true rotation" on this board there are conversations about a less painful method. I think those attempts were abandoned due to backwards compatibility. They also have issues due to ignoring the fact that a rotated hull won't give accurate collision.

I think good ladders are achievable in quakec, unless your complaint is the need to place a trigger instead of tagging brushes as "ladder". Probably just needs more code iteration to make it good.

Scrolling textures -- agree on this. An easy feature to implement, just needs an accepted standard, and then an example implementation. I guess the right people never strongly cared. (correction, some engine coders did address it, for example mankrip added it in retroquad I believe. And LordHavoc would probably tell you that darkplaces already supports q3 shaders so just use those.)