News | Forum | People | FAQ | Links | Search | Register | Log in
QuakeDroid - Quake For Android
QuakeDroid is Android Quake that should run on any Android phone made in the last 5-6 years, but has only been tested on 2 phones (one 32-bit, one 64-bit).

http://quakeone.com/quakedroid

Designed to have controls similar to popular mobile games (/cough Minecraft). Went deep on the documentation to try to empower the user.

Does not require Quake to install, it downloads Quake shareware on startup.

* How to put your TrenchBroom/J.A.C.K map on your phone
* Where is your Quake folder?
* Difference between shareware vs. registered Quake
* Put registered Quake pak1.pak from Steam/GOG on your phone
* How to set a startup command line.

The menu has 2 methods of navigation, you can touch items like "Single Player" or manually slide the volume slider bar or use the menu nav buttons.

* Tap-fire (double tap on an Ogre to shoot it)
* Drag-look (like Minecraft)
First | Previous | Next | Last
Having Issues With PS4 Controller 
Both Bluetooth and wired connections are fucked. HOWEVER, it's not QuakeDroid. There are 3rd party options to solve it but I'm not rooting my phone to play Quake or any other game.

I tried the Steam controller had a little bit of luck but the right pad acts as a mouse cursor. Sadly the orientation is for portrait and the mouse doesn't work as an input device for the software anyway.

Any suggestions would be appreciated. I'd like to buy a Steel Series controller for this but a bit gunshy at this point. 
@dumptruck - PS4 Controller Android Article 
This article may help you:

There was a dark time, long, long ago (six years or so), when Android was still a platform in its nascent stage, and to really unlock its best features, you had to root your device. Well no more. One of the many things you can do now without rooting is connect your PS4 controller to your Android phone or tablet via Bluetooth.

https://www.maketecheasier.com/connect-ps4-controller-to-android/

This is also this article:

https://www.teamknowhow.com/discover/discover/how-to-connect-a-ps4-controller-to-android 
@apm - Mogo "hid Mode" 
Some reading/researching around ... you might look into trying to set HID mode.

HID refers to the gamepad protocol inherently supported in Android™ devices running 3.0 and higher.

Both my EVO VR gamepad and my external bluetooth keyboard use HID mode.


MOGA's Pivot app has yet to be updated for Android 5.0 compatibility

However, certain MOGA gamepads (not all) have a HID mode switch on them that let you use HID mode with games.

"How to connect moga pro controller thru hid mode"

https://www.youtube.com/watch?v=5NwT3Msoxzo 
@Baker 
Thanks for the links. I've been able to pair the devices as shown in the links above. I believe the PS4 is defaulting to HID mode already as I can navigate the phone's UI as the guy showed in the video.

What happens is that I can use the X button IIRC on the controller and the analog sticks do work - which is a great start - but as soon as I press the other buttons the whole thing blows up. The view pans up and the QuakeDroid menu behaves as if the up button is held down.

I think re-configuring the buttons is probably the fix I need but the app you linked is out of date and unstable per the developer. I am going to keep searching and will report back.

There are other apk's that are out there that require rooting my phone to fix all this that I won't even bother with. I'll probably just get a different controller eventually. But I'm tantalizingly close on the Ps4 Dualshock. 
@dumptruck - Made For Android 
The SDL2 library controller support is for the gamepads that were designed to support Android out-of-the-box.

I guess it is natural that some users with existing PS4/XBox/Steam Controllers are going to try to use those with their phone/tablet, but those aren't the "Works With Android" controllers that the SDL2 library supports.

They may work or not, may require Google Play button remapping apps or what not. The mileage on that is going to vary.

The best I can probably do with that if someone like yourself gets it to work with, say, a PS4 controller, is to make note of your post and perhaps eventually throw a link on QuakeDroid page. 
 
Obviously, I do hope you get it to work. 
 
And if you do, I'll accomodate the info on a "using PC/console info" page or similar on the QuakeDroid page. 
@apm - "B Mode" 
“B” mode works with Android devices running Android OS 3.1 (Honeycomb) or higher.

According to this link, you may need to switch your MOGO to "B" mode.

https://support.mogaanywhere.com/hc/en-us/articles/201290560-Which-Android-devices-does-the-MOGA-HERO-POWER-work-with- 
@Baker 
2 things. I was really only attempting it because I read that you can use PS4 controllers on Android and thought "what the heck." But as with everything it's a rabbit hole, time-suck thing to get working.

Even Sony's Android specific streaming solution is limited to specific phones OR you need to root the phone (and *then* you sign into your PSN account --- fuck that noise.)

The other reason I'm trying this is to just add to the knowledge base here on the thread. So, please don't research too much on my account!! I asked earlier as I was hoping against hope there was somethin I was missing.

After work I'll hit Fry's and see what they have for Android controllers. I had a Steel Series for iPad and I do think their products are excellent overall.

Thx! 
Anisotropic Filtering/GL Error Pop-ups 
Confirming that everything starts up clean now.

An interesting observation is that the texture filtering options don't work either. My guess is that there's a bug with glTexParameter calls on this device, and that your code is otherwise fine. 
 
When I was trying to get it to run, if I recall correctly OpenGLES 1.1 doesn't support the texture filtering options docs.

In head, I was planning OpenGLES 1.1 first and then convert to OpenGLES 2.0 using RMQ engine GLSL as a guide.

But getting OpenGLES 1.1 to work was more time consuming than anticipated. Also I was met with challenges like non-supported draws like GL_POLYGON (easy --> GL_TRIANGLE_FAN) but more complex ones (GL_QUAD_STRIP) slowed me down a bit.

Plus limitations like the typical mobile NPOT extension GL_APPLE_texture_2D_limited_npot (despite the name Android uses this commonly) can't be used with clamp to edge textures (if I recall).

So more can definitely be done on the rendering side of things over time. 
 
Hrm. Trying the latest version on my new Android 6 tablet, the screen does not auto-rotate (flip). That's a problem because my keyboard case connects to one side of the tablet, which means UP is a certain direction, but QuakeDroid does not agree that this direction should be the UP!

But my bluetooth gamepads work flawlessly with no problem. I use an iPega 9023 v2 (suitable for tablets 7" and larger) and an iPega 9055 (suitable for smaller phone-size devices). These controllers actually hold the device, basically converting your phone or tablet into a portable game console. 
@gunter 
Is it upside down from what you need?

I could add a setting possibly in video options to flip it.

dumptruck also said for his phone it was "upside down".

/Awesome your gamepad works flawlessly. 
@Baker 
All the phones I tested QuakeDroid on are "flipped" like this. They are all Motorola phones from the past few years.

Moto X Pure (aka Style)
Moto Mini
Moto X (1st Gen)
Motorola RAZR 
Sorry 
That second one should read Droid Mini - but it's still a Motorola. 
GL QuakeDroid Alternate Landscape Build 
Download: GL QuakeDroid Alternate Landscape

I'll end up making this a setting in video options later. 
 
I can't speak with certainty for whatever tools you are using to build this, but with Android development stuff, auto-rotate should be a simple switch somewhere, along with limiting it to either portrait or landscape modes. I mean, it's basically built-in functions in Android to detect which direction is UP and rotate the screen accordingly; you just have to set the game to allow it when developing. Of course, I have played games where it is locked to one position... so it may not be something that is easily set in all development tools. I just know that when I made my little android games ( www.tinyvast.com ), it was a very simple setting to allow auto-rotate in landscape modes only.

If that's not an option, then I guess a menu setting would suffice! 
@dumptruck 
I think I'll default the landscape to the "gunter/dumptruck" preferred kind. Looks like that should be normal. And then I'll put an option in video options to flip it. 
@gunter 
The alternate landscape build should solve you issues for now. Let me know. 
Whoa. 
I guess it's cold out today! :) 
 
Btw, Baker I did get it to build in Android Studio with no issues - nice!

Double checked the joystick initialization code and SDL is just returning the accelerometer and no joysticks for my setup. I think my tablet may just lack the Xbox driver, as it's a running a customized android, so I probably can't help test at the moment. 
@ericw 
I'm glad compiling went easy. I try to make things easy to compile :) I did a reinstall clean compile, but hadn't tested fresh on a different machine.

I actually don't use Android Studio (it must be installed for the toolchain).

I go to the Android folder where there are several .bat files I made ...
1) (Done just once) make_symlink.bat (hooks up SDL2 folder)

2) gradle_assembleDebug.bat (compiles)
3) adb_install.bat (installs apk to phone)
4) (optional) adb_debug.bat (open a window with live log prints as it runs)

Because the Android compile process is rather slow ... I typically make sure Visual Studio will compile the Windows version of the engine (in 3 seconds Visual Studio will tell me if I am missing a semicolon, the Android process will take 2 minutes to tell me such a thing). I also have a "Fake Android" configuration in Visual Studio with the right preprocessor defines for Android so I can easily work with the code.

/And as time moves on, I want to see if I can speed up the Android compile. Sadly the gradle build system documentation for use with the Android NDK (native C/C++ dev kit) is basically non-existent. 
 
Well, I played for a little while on FvF and got the same crash as my old device:

Cache_MakeLRU: active link


Also, I feel like the "Invert Mouse" setting should also invert the look axis on the gamepad (right joystick).

Other than that, gamepad control feels really good. Perhaps the "Dead Zone" (the amount you can move the joystick before it counts as moving the joystick) for looking up and down should be a little larger as compared to the dead zone for looking left and right. Most of the time you don't want to look up and down but it's not too hard to accidentally let the joystick drift up or down a bit when you're looking left and right.

When hiding the onscreen controls (from keyboard use), there's no need to disable touchscreen aim. 
 
Check this out for a picture of my awesome Quake rig running QuakeDroid: http://www.fvfonline.com/forum/viewtopic.php?f=4&t=3810 
@gunter 
I've been focused on getting the OpenGL build up and running, so I haven't had the time yet to hit the everything on the todo list (especially a lot of qmaster items). But they'll happen ...

For the "active link" I either have to acquire the Quakespasm SDL sound mixing code that they acquired from ioQuake3 or read mh's cache system redesign tutorials and redesign the sound cache system.

For deadzone and company, the following cvars are available and they all save to config.

joy_deadzone
joy_deadzone_trigger
joy_sensitivity_yaw
joy_sensitivity_pitch
joy_invert
joy_exponent
joy_exponent_move
joy_swapmovelook
joy_enable

Since I use adapted ericw/Quakespasm controller support, I would prefer to leave the default values unchanged. 
First | Previous | Next | Last
You must be logged in to post in this thread.
Website copyright © 2002-2024 John Fitzgibbons. All posts are copyright their respective authors.