You better double check and be double sure you did the command line right
1) The version I provided (special gunter one)
2) The correct .exe
3) -nomultisample -nostencil -developer

It is possible I solved your problem if you didn't use the right command line. 

It doesn't help, and changes little in the log, other than changing this part:

Swap control enabled
8 bit stencil buffer
Max texture size: 2048
Multitexture: 45407760
Non-Power of 2: 0
Combine: 1
Stencil Bits: 8
completed.Gamma protector set


To this:


Swap control enabled
Warning: Stencil disabled at command line
Warning: Multisample disabled at command line
completed.Gamma protector set



Everything else is identical, including the crash. 

triple-checked the special version, same result, but the error log has all the lines from above:


Swap control enabled
Intel Display Adapter detected
Warning: Stencil disabled at command line
Warning: Multisample disabled at command line
Max texture size: 2048
Multitexture: 452634108
Non-Power of 2: 0
Combine: 1
Stencil Bits: 0
completed.Gamma protector set 

Windows: Open GL | WinQuake (software renderer)
Windows: Direct3D | Source

Still didn't update the Mac build.

Revision 3:

New Feature:

Multiple hdfolders. hdfolder "hires" (1 folder) or hdfolder "hires,qrp,plagues_pak" (multiple folders). Changed: paks in a hdfolder are *ignored*.

Outstanding Issue (only one, unless I skipped something):

International keyboard --> tilde (mfx/fifth) Need to know what keyboard layout and what physical key is being pressed. For the moment, Shift-ESC will always open console and "in_keymap 0" *might* make it work as expected. Let me know!

Resolved:
2 mirrors in view disables 2nd mirror (fifth re:e1m5), bolt.mdl -> bolt1.mdl (qmaster), lavacolor typo fixed (gunter), cl_autodemo off by default (dwere's computer), r_shadows -1 = full dark (gunter), Direct X version mirrors disabled (gunter), mousewheel up/down (dwere), hdfolder set will disconnect (icaro), menu bind key fix (fifth)

Punt or Non-Issue: server bind discard clearing existing alias if named same (gunter) = acceptable for now, few people use aliases. scr_showfps + viewsize < 100 doesn't show (gunter) = intended behavior.

@icaro .. if you still have any issues with hdfolder or how that works, let me know. You don't need to put it in autoexec. In fact, don't. It is read very, very early.

@gunter .. maybe something a thought will come to me on how to solve your video card, but the Direct X build does everything but 2 things. Not too bad. 

I don't suppose it would be possible for you to build a linux version?

Gulliver uses linux.... 

I assessed it, finishing up the Linux port probably take 40 hours of coding. Maybe 2017 some time. 

To fix it so it works with Gunter's video card, which didn't have texture non-power of two capability which I noticed in the log. 

Unfortunately, I have to say that the issue in map d15 of "Malice" still exists with the latest Mk V build. :/ If you play without saving, the game still returns your FOV to its original state, but as soon as you save and reload or quit and restart the game, FOV is set to 170.

I am also sorry to state that cutscenes still don't work. At the end of the level, game stops with this error:

ERROR: Couldn't open C:/Games/Quake/malice/cuts/cut8.dem

(Note: The first two dashes of the directory are actually inverted, but for some reason, these are not shown in this forum.)

This also wouldn't change if I extract the "cuts" folder from pak2.pak into the Malice installation directory. 

Additional note:
On my German keyboard, I have to press "�" (oe) to bring down the console. Used to be the key right on top of "Tab" (to the left of "1"). 

@johnny law - http://quakeone.com/markv

I guess from now on I'll always have the current version there. It's not complex but does the job.

That page has a link to this thread.

@nightfright
a) Malice cut-scene issue addressed, Mark V doesn't expect demo names with slashes in them.

Go to the above page (which isn't very complex) and it has the current version download.

b) Can you give me a link to the picture of the keyboard layout (if I do Google I get conflicting pictures) ?

If you were in another application and did the keypress, would it do a tidle or do you press shift or a different modifier key?

I'm trying to determine whether I need to use the physical key scan code or what the key press produces. 

alk10 is a Nehahra mapset that is supposed to be installed into its own directory. Therefore, it either requires multiple -game parameters or -nehahra.

The only alternative I can see is splicing nehahra and alk10 into one directory. 

Current download: http://quakeone.com/markv/

@mfx/fifth/nightfright

Made the "tilde" position on the keyboard a "holy" key that no matter what keyboard someone is using it toggles the console.

Should bring that to a closure.

Current source is always http://quakeone.com/markv/mark_v_source.zip

@dwere - Interesting problem that will need addressed. I guess no one noticed before because to play Nehahra was a major pain in the arse. Never knew about alk10. I played the Tim Elek add on. And I *think* there may be 1 or 2 more Nehahra maps. 

With the latest build, the two issues in "Malice" are finally history! Only one (cosmetic) thing remains now: When playing cutscenes, the statusbar is not hidden automatically. Dunno if that's important, though.

Regarding keyboard layout:
A German keyboard looks like this:
http://www.netzteilcheck.de/images/produkte/i21/21566-gerade.jpg

I had to edit config.cfg to make Mk V use the correct console key again:
bind "�" "toggleconsole" (before edit)
bind "/" "toggleconsole" (after - it's not this dash, but inverted)
Otherwise, console would only open with "�" key (which is probably "�" on English keyboard). 

Updated yet again, allowing the possibility of doing game alk10 -nehahra in the console to run that single player release.

Current download: http://quakeone.com/markv/ 

/Malice, yeah it does horrible things ... it runs now ... I think I'm done dealing with it ;-)

The latest recently updated version of Mark V *should* assume on any keyboard that the key in that position (tidle in my case) is the toggle console key.

I need verification, but I think that is history.

I switched my keyboard layout to German and until I hit the "Z" key didn't even realize it when running Mark V. 

Console key works as intended now. The only odd thing is that if the game creates a new config.cfg file, the default setting is in_keymap "1". With this, Mark V will print every scancode onscreen whenever a key is pressed. That's kinda annoying. 

On Quaddicted there's also Invein, Maelstrom, ROTCS and TSD. 

Previous comment was addressing the 1 or 2 more Nehahra maps thing. 

What's left on my wishlist for Mark V right now (just to mention it):

- Ingame menu toggle for texture filtering (switch between gl_nearest_mipmap_linear and gl_linear_mipmap_linear without having to use autoexec.cfg)

- Underwater warp effect like in software Quake (if that's even possible)

Side note:
Does r_mirroralpha work again? I just noticed the stained glass window in the "Easy" hallway of the intro map is reflective again. If you enabled that again recently - neat! 

Sorry for the long pause, real life issues. The console issue is gone, instead it prints every stroke now, as NightFright described.
Also the ^symbol is added to first new char i press when toggling the console now, QS had similar problems once.

Will look out for further bugs, AD mod loads fine here for now, even the new unreleased version + maps. 

Yeah, mirror support is a major feature in the current version.

I had thought about the texture mode thing but considering it's minor decided against It does autocomplete, press alt+space, but I know what you mean. Underwater warp is out-of-bounds for Mark V, would require GLSL and Mark V doesn't use GLSL. 

Glad to hear that fixes that .. I'll have to think of a "correct" way of blocking the unwanted extra character. Probably won't be too hard. 

Mfx/nightfright issue with German keyboard added unwanted character after using the tilde key equivalent is solved.

Current download: http://quakeone.com/markv 

mark_v.exe -nehahra -game alk10 +map alk10a works, but the engine crashes with a generic Windows error right after the map starts. This seems to be caused by the level using xm/s3m music, as Nehahra levels that don't use music load fine.

qconsole.log says:

Warning: FMOD module not found ( nehahra/fmod.dll )

I placed FMOD.DLL that comes with Nehahra into the nehahra directory just to see what's gonna happen, and it said that the module can't be initialized instead. 

Underwater warp is out-of-bounds for Mark V, would require GLSL

Use glCopyTex(Sub)Image2D then draw a grid (similar to what stock Fitz does for it's render-to-framebuffer warp, you may even be able to recycle the same code). No shaders needed.