That stops him from freezing in attack.

Now I try the next part, the walk cycle.
For making it not to complicated I added the last part to the stand pose. This looks like void() forg_stand109 =[ $stand33, forg_walk1 ] {};

Now he starts the walk cycle, but again it freezes because of the ai_walk() part. If I use notarget the walk cycle ends well.

Now I can't get out by deleting ai_walk() as I need it to make him move. 

use
movetogoal() instead of ai_walk. 

Thanks necros, you're a star!

Now my last intention, say I make it sit, walk to aside for two steps, then I want him back to the startpoint with another function, I think of ai_run, still without attack.

How do I fix that in the stand function?
I mean, the last forg_stand109 goes to forg_walk1.
So I can use this function again, but when I use the ai_run I must formulate the stand function again to forg_stand109 =>forg_run1.

I know this sounds all complicated, maybe I should turn the whole thing into a static entity.
But as far as I can see, the limit of a static entity is 256 frames.
What is the limit of the monster.qc? 

I've been tinkering on the player.mdl.

I decided to remodel the whole model poses, just to have the fun of adding some new ones.
I'm not a deathmatch player so I will never have the change to meet him, but if someone has a request to give it a new pose I'm willing to do.

Here's the beta of the foxplayer
I added a swim pose, but any other possibillity would go. 

quakeworld requires that your skin is not modified.
you can change the texture coords, but make sure your model still looks okay with the vanilla skin exactly as it is.
(this also applies to nq replacement textures, but is harder to control for).

you can use framegroups to get around protocol limitations. or you can just use a better client that supports higher frame numbers. 

I don't understand a word of it.
Did I modify the skin texture?

I'm sure you try to inform me well, but I just took the original skinfile and dropped it on the model after making sure it had the same texture cooords and Q1pal. Further I don't have that much engine experience,
I'm just a singleplayer in a shooter fence. 

After weeks on working with these guys, they're now fully operational (although need some polishing up but still), and are ready to be integrated on top of Scourge of Armagon's source code, so I could use rotating doors, force fields and try to look for a way to make monster spawners to use in TrenchBroom.

Rocketeer - shoots accelerating rockets:
http://image.noelshack.com/fichiers/2015/53/1451432379-infantry20151230002549-00.jpg

Dimensionnal Traveller - once humans seeking the power of Shamblers, they got it without their endurance and resistance to explosions. See Doom 2's Hell Knight:
http://image.noelshack.com/fichiers/2015/53/1451432382-infantry20151230002559-00.jpg

Shell Trooper - A retake of Quoth's Defender, he shoots grenade with great accuracy on top of a nasty Shotgun blast as a close range attack:
http://image.noelshack.com/fichiers/2015/53/1451432382-infantry20151230002619-00.jpg

Butcher - An Ogre that took a cybernetic suit to better endure attacks and switch from a Grenade Launcher to a Flak Canon:
http://image.noelshack.com/fichiers/2015/53/1451432380-infantry20151230002642-00.jpg

Shock Marine - The Elite version of the Enforcer, he's now better equipped to do his job:
http://image.noelshack.com/fichiers/2015/53/1451432379-infantry20151230002656-00.jpg
http://image.noelshack.com/fichiers/2015/53/1451432778-infantry20151230004523-00.jpg 

Nice work Daya, glad they're coming together at last!

In celebration of Arcane Dimensions coming out, and some of my models getting some use at last, I've finally got round to releasing a new one! Animated gif and details at the post below:

https://tomeofpreach.wordpress.com/2015/12/30/vortex/ 

Daya is now mastering the magic of character development. Respect.

Preach, effects mdl is a great insight. It's environment art, maybe I should start there.

I have a request for modders

It's a player/mapper request.

Arcane Dimensions brought nice improvements to Quake 1 weapons. But a design weakness still annoy me: the boomstick. Why two shotguns? It's Doom inheritance, I believe. It also makes a lame noise, and it's not a very interesting model.

I use this ugly duckly a lot, whenever I want precision at a distance with cheap ammo. Playing thru a level with that "broom-broom" purring stick is a downer.

I'd like it replaced by a powerful silver 45 revolver. Or a desert eagle pistol. It would be hitscan or shoot fast projectiles like AD's shotgun. The damage would be lower than SG, but at a higher fire rate. And it would make a decent noise.

It requires "bullets", a new ammo class. Or maybe it would be a powerful longer gross caliber pistol, wild west style, that shoots shells and toss pellets.

There is the problem of the player's model holding a shotgun. All Quake weapons are long, so that shape of a long gun in his hand doesn't look so odd. The exception is the axe, and the game switches the player model when you choose it. A pistol would require a change like this. Or not?

What do you guys think? 

Throwing in a pistol will only make the game more like Doom. I think Quake could have done better to distance itself from Doom further. I will agree with what you're saying about weapons in a sense. I think AD having a single barrel and a triple barrel is an interesting distinction. I always felt like the starting gun should have been the nail gun, or maybe a crossbow like weapon that shoots nine inch nails.
This would provide a really nice distinction between guns and you could also have a more powerful single barrel shotgun too. 

Well, if it has to be a shotgun, at least it should be more interesting, since it's an "initial gun" we use all the time. If you want to keep away from Doom, many other games have cool shotties, like Duke Nukem. Better animation and better sound, at least. 

I'd say the AD shotgun feels more fun to use even though it's functionally a little worse by not being hitscan. 

adib it's interesting you're thinking of a revolver, because for the redoing of the shotgun I thought of a similar thing, by taking inspiration from this: http://www.smashbros.com/images/character/mii_fighter/screen-9.jpg (minus the fact they're arm canons). I already changed the shooting sound to TF2's scattergun to make it more punchy, and the big change would come in animating and coding the barrel for every shot. It could be renamed as a Revolver that's big and shoots tightly-spread shells.

Same thing for the Super Shotgun, by taking inspiration from Bioshock 2's 2-barelled Shotgun with the 3-shot upgrade: http://bioshock.wikia.com/wiki/File:2BarrelShotgun-2.jpg

So with what's happening now I feel more inclined to work on this. 

Great! I also regret that you're already in a mod, because I have some ideas for one and was hoping to drag you in. It would be sort of steampunk. If you like to talk, send me an email. 

Smart way to patch the vertices.

I was trying something with animated texture,
but in game it is too slow 

http://image.noelshack.com/fichiers/2015/53/1451554446-which-best-shape.png 

The one that looks best in a first-person view 

@Daya:
Top right. 

 

For software rendering, none.

The fact you're modeling with quads means there's no way to know what the actual triangle layout will be, and good triangle placement is crucial to avoid bad distortions in affine texture projection.

Triangle placement also affects the gouraud shading (Both in software and GL renderers), but that's mostly a problem in organic animated models with high contrast lighting. 

Also, without a textured view of the models, there's no way to know if your textures will work well with the triangles. 

I was just asking which shape was better aesthetic-wise 

Yellow has been left untouched (just like in the HUD) and is here just for comparison sake:
http://image.noelshack.com/fichiers/2016/02/1452786366-armors.png 

Posted by Skiffy [115.132.145.180] on 2016/01/18 15:37:14

Does anyone here know what palette format I need to use on PCX files for Preaches MD3toMDL tool to remap the colors correctly for the final compiled MDL file?

I'm using an .act file I've been using for ages making normal Q1 textures for levels but for some reason its not working with this tool. The colors come in all sorts of wrong.

Thanks for any help or tips you might have!

Cheers.