News | Forum | People | FAQ | Links | Search | Register | Log in
Mark V - Release 1.00
http://quakeone.com/markv/

* Nehahra support -- better and deeper link
* Mirror support, "mirror_" textures. video
* Quaddicted install via console (i.e. "install travail")
* Full external texture support DP naming convention
* Enhanced dev tools texturepointer video inspector video
* IPv6 support, enhanced server capabilities
* Enhance co-operative play (excels at this!)
* Software renderer version (WinQuake)
* "Find" information command (ex. type "find sky")

Thanks to the beta testers! NightFright, fifth, spy, gunter, pulsar, johnny law, dwere, qmaster, mfx, icaro, kinn, adib, onetruepurple, railmccoy

And thanks to the other developers who actively provided advice or assistance: Spike (!), mh, ericw, metlslime and the sw guys: mankrip and qbism.

/Mac version is not current yet ...; Linux will happen sometime in 2017
First | Previous | Next | Last
 
D:

Ok Baker, I NEED ogg support!

I tried the hacks mentioned above (either renaming my ogg to mp3, or hex-editing mark_v), then, after installing the ogg directshow filter ( http://www.vorbis.com/setup_windows/ ), Mark_V does play ogg.... and it loads in a FRACTION OF THE TIME as an mp3 file of the same file size!

Do you remember a while back, me going through a LOT of testing because I have an issue where loading an mp3 file causes Mark V to freeze up while the file loads? (mentioned in #651 above)

After some encoding gymnastics I managed to get that loading time (during which everything freezes up) down to only like 4.2 seconds for track04.mp3.... Well, I converted it to an ogg of the same bit rate and file size, and it loads in only 1.23 seconds!

So... yeah. That would be the reason to allow ogg files to be found by Mark V (since it is already capable of playing them).

You really don't have to do all the complicated stuff mh mentioned. Just state, "Mark V supports the following formats, in the following order of preference: mp3, ogg."

And let the users sort their own files and formats and bitrates. 
 
Indeed, there's no need to compare bitrates or anything, just let it read formats A|B|C in the priority of A, B, C. And the game folder should take priority over id1, e.g. say you have OGGs in id1 but e.g. Travail comes with an MP3 soundtrack, disregard the OGGs in id1 then, unless there's not enough tracks in the game folder, in which case read the missing ones from id1. I think that's how Quakespasm handles it anyway, correct me if I'm wrong. 
Baker 
is there a way to set the fog value via an cfg file or fog depends on qc? 
@ Spy 
Just use an external_entity file(yourmapname.ent) Put the fog command in there. 
I Don't Quite Sure What You Talking About 
why would i put the fog command in the external ent file? and where exactly should i put it?

i'm using the fog value via the worldspawn. AD mod supports this and shows fog correctly, but it seems kinn's old mod (bastion/marcher) doesn't support fog from the worldspawn, as there's no fog after loading map.

i'm just wondering :) 
 
The worldspawn "fog" key is handled by the engine, it should work in id1 with MarkV (and most engines). Maybe bastion/marcher is resetting it via QC. 
@ Spy 
My answer was for the simple question of setting fog values via an external(.cfg) file, now I see your problem! 
Eric 
i have a map with a worldspawn settings something like
fog_density x
fog_colour x y z

and after loading this map in AD the fog appears correctly, then i put the very same map in the id1/maps folder and run it from the vanilla game
there's no fog at all
until i manually set the fog numbers in the console, what gives? 
@spy 
those are AD-specific fog keys.
Try: "fog" "density r g b" 
Have You Just Tried... 
"fog" "Density R G B"

All on one line for stock id? 
 
Try: "fog" "density r g b"

i put this line fog 0.015 0.35 0 0
into an *cfg file without the quotes, but no avail. 
 
Sorry, put it in worldspawn, not a cfg file :) i.e. the worldpawn key is "fog" and the value is "0.015 0.35 0 0" 
Miracle 
yay, it's working this way. silly me. Thank you Eric and damage_inc 
Permission 
Hey, I require help
Whenever I try to launch any of those 2 executables using:
./mark_v_linux or ./mark_v_winquake_linux
I get following error:
bash: ./mark_v_winquake_linux: Permission denied
Double-clicking doesn't work either

On manjaro, hope anyone can help 
Nevermind! 
chmod +x mark_v_winquake_linux
Has done the trick for me, it works now! 
Marcher / Bastion Imps Sprite Issue 
I was playing back some demos of Spy's work-in-progress map in 1.36 and the final frames of the imp fireball (the impact only) show up as non-transparent. If this is not a known issue, or repeatable I can try a screencap to make this a bit more clear. Works fine in other engines. Notably Quakespasm-admod 
Kinn Sprites 
I've ran into this.

Which sprites are you using?

Kinn original: uses black for transparency requires enfine with support for .png override textures (e.g. Darkplaces) and additive mode.
AD: Not sure.
Keep: I converted all mine to use pink transparency for full support on all engines. 
@Qmaster 
It's actually an older map of Spy's that he's working on getting ready to release pretty soon. Not sure what assets he was using.

@Spy are you using the same assets from the original Bastion/Marcher maps? 
@dumptruck_ds Kinn Sprites 
Mark_V enables external textures by default, so set external_extures to 0 and reload the map

or just delete all of *.tga files from the sprites folder, they are absolete now 
FOV 
Mark V's adaptive FOV calculation method seems to be quite different from QuakeSpasm and original FitzQuake. I need to increase FOV by about 6 to get the same field of view as in QS (using a 16:9 display). Of note, QS just does vert- when you set scr_sbaralpha 1, while Mark V does hor+. Not sure which method is preferable, however, it's possible that Baker based his adaptive FOV calculation on specific scr_sbaralpha and viewsize values. In particular, setting scr_sbaralpha 1 and viewsize 100 gives about the same FOV as in QS with full screen view point (that is scr_sbaralpha 0). But nowadays most people are probably playing with the transparent HUD, so this just results in smaller FOV. 
Good News! 
I have finally come across a solution to my problem. It turns out that I actually didn't have pak1 and pak0.pak. I thought I did, but I didn't check my ID1 folder. Long story short, I found something which contained both pak files and copied them over.

I love it. It runs like a charm:

https://i.imgur.com/WMxEBLv.png

I'm so sorry for wasting your time over such a dumb mistake of mine. 
 
>uses markv
>looks like glquake 
 
Missing PAK files was the problem?

How does that happen? If I remove my PAK files and try to run Mark V, I immediately get a popup error message saying it can't find the pak files.....

Maybe corrupt pak files? 
 
@killpixel
My laptop is 10 years old, I'd rather not...
Also, it's my first time using this sourceport, so I haven't tweaked all of the settings yet. Though, I'd love that to change. :)

@Gunter
Funny thing is, there were no .pak files at all in my ID1 folder.
The .pak files' contents were actually extracted to my ID1 folder, but the .paks themselves weren't there. Interesting. 
 
Interesting! You may have found "an issue."

I tested with unpacked pak files, and Mark V does indeed just crash without any meaningful error message.

These alternate engines I tested work just fine with unpacked pak files:

fitzquake 0.85
DirectQ
fteqw

Unpacked pak files should be an acceptable setup... so... Mark V should be able to handle that.




Anyway, if you're interested in tweaking Mark V with all kinds of setting which make it look better (in my view), I have a page with downloads and settings to alter: http://www.fvfonline.com/fitzquake.php

Then come play FvF :D

www.fvfonline.com
connect fvf.servequake.com 
First | Previous | Next | Last
You must be logged in to post in this thread.
Website copyright © 2002-2024 John Fitzgibbons. All posts are copyright their respective authors.